The cryptography-based networking stack for building unstoppable networks with LoRa, Packet Radio, WiFi and everything in between.
Go to file
Mark Qvist d99d31097b Updated manual 2022-05-29 10:14:31 +02:00
Examples Updated example 2022-01-11 03:06:35 +01:00
RNS Implemented I2PInterface recovery on I2P router restart 2022-05-28 02:24:01 +02:00
docs Updated manual 2022-05-29 10:14:31 +02:00
.gitignore Improved shutdown handling on interrupt. Updated gitignore. 2021-11-04 17:15:58 +01:00
LICENSE Updated license 2022-03-25 20:07:09 +01:00
Makefile Added makefile 2021-12-01 19:23:19 +01:00
README.md Updated readme 2022-05-29 09:48:53 +02:00
setup.py Added rnx remote command utility 2022-05-24 20:14:43 +02:00

README.md

Reticulum Network Stack β

Reticulum is the cryptography-based networking stack for wide-area networks built on readily available hardware. It can operate even with very high latency and extremely low bandwidth. Reticulum allows you to build wide-area networks with off-the-shelf tools, and offers end-to-end encryption and connectivity, initiator anonymity, autoconfiguring cryptographically backed multi-hop transport, efficient addressing, unforgeable delivery acknowledgements and more.

The vision of Reticulum is to allow anyone to be their own network operator, and to make it cheap and easy to cover vast areas with a myriad of independent, interconnectable and autonomous networks. Reticulum is not one network. It is a tool for building thousands of networks. Networks without kill-switches, surveillance, censorship and control. Networks that can freely interoperate, associate and disassociate with each other, and require no central oversight. Networks for human beings. Networks for the people.

Reticulum is a complete networking stack, and does not rely on IP or higher layers, but it is possible to use IP as the underlying carrier for Reticulum. It is therefore trivial to tunnel Reticulum over the Internet or private IP networks.

Having no dependencies on traditional networking stacks free up overhead that has been utilised to implement a networking stack built directly on cryptographic principles, allowing resilience and stable functionality in open and trustless networks.

No kernel modules or drivers are required. Reticulum runs completely in userland, and can run on practically any system that runs Python 3.

Read The Manual

The full documentation for Reticulum is available at markqvist.github.io/Reticulum/manual/.

You can also download the Reticulum manual as a PDF

For more info, see unsigned.io/projects/reticulum

Notable Features

  • Coordination-less globally unique adressing and identification
  • Fully self-configuring multi-hop routing
  • Complete initiator anonymity, communicate without revealing your identity
  • Asymmetric X25519 encryption and Ed25519 signatures as a basis for all communication
  • Forward Secrecy with ephemereal Elliptic Curve Diffie-Hellman keys on Curve25519
  • Reticulum uses the Fernet specification for on-the-wire / over-the-air encryption
    • Keys are ephemeral and derived from an ECDH key exchange on Curve25519
    • AES-128 in CBC mode with PKCS7 padding
    • HMAC using SHA256 for authentication
    • IVs are generated through os.urandom()
  • Unforgeable packet delivery confirmations
  • A variety of supported interface types
  • An intuitive and easy-to-use API
  • Reliable and efficient transfer of arbritrary amounts of data
    • Reticulum can handle a few bytes of data or files of many gigabytes
    • Sequencing, transfer coordination and checksumming is automatic
    • The API is very easy to use, and provides transfer progress
  • Lightweight, flexible and expandable Request/Response mechanism
  • Efficient link establishment
    • Total bandwidth cost of setting up an encrypted link is 3 packets totalling 237 bytes
    • Low cost of keeping links open at only 0.62 bits per second

Examples of Reticulum Applications

If you want to quickly get an idea of what Reticulum can do, take a look at the following resources.

  • LXMF is a distributed, delay and disruption tolerant message transfer protocol built on Reticulum
  • For an off-grid, encrypted and resilient mesh communications platform, see Nomad Network
  • The Android, Linux and macOS app Sideband has a graphical interface and focuses on ease of use.

Where can Reticulum be used?

Over practically any medium that can support at least a half-duplex channel with 500 bits per second throughput, and an MTU of 500 bytes. Data radios, modems, LoRa radios, serial lines, AX.25 TNCs, amateur radio digital modes, ad-hoc WiFi, free-space optical links and similar systems are all examples of the types of interfaces Reticulum was designed for.

An open-source LoRa-based interface called RNode has been designed specifically for use with Reticulum. It is possible to build yourself, or it can be purchased as a complete transceiver that just needs a USB connection to the host.

Reticulum can also be encapsulated over existing IP networks, so there's nothing stopping you from using it over wired ethernet or your local WiFi network, where it'll work just as well. In fact, one of the strengths of Reticulum is how easily it allows you to connect different mediums into a self-configuring, resilient and encrypted mesh.

As an example, it's possible to set up a Raspberry Pi connected to both a LoRa radio, a packet radio TNC and a WiFi network. Once the interfaces are configured, Reticulum will take care of the rest, and any device on the WiFi network can communicate with nodes on the LoRa and packet radio sides of the network, and vice versa.

How do I get started?

The best way to get started with the Reticulum Network Stack depends on what you want to do. For full details and examples, have a look at the Getting Started Fast section of the Reticulum Manual.

To simply install Reticulum and related utilities on your system, the easiest way is via pip:

pip3 install rns

You can then start any program that uses Reticulum, or start Reticulum as a system service with the rnsd utility.

When first started, Reticulum will create a default configuration file, providing basic connectivity to other Reticulum peers. The default config file contains examples for using Reticulum with LoRa transceivers (specifically RNode), packet radio TNCs/modems, TCP and UDP.

You can use the examples in the config file to expand communication over many mediums such as packet radio or LoRa (with RNode), serial ports, or over fast IP links and the Internet using the UDP and TCP interfaces. For more detailed examples, take a look at the Supported Interfaces section of the Reticulum Manual.

Included Utilities

Reticulum includes a range of useful utilities for managing your networks, viewing status and information, and other tasks. You can read more about these programs in the Included Utility Programs section of the Reticulum Manual.

  • The system daemon rnsd for running Reticulum as an always-available service
  • An interface status utility called rnstatus, that displays information about interfaces
  • The path lookup and and management tool rnpath letting you view and modify path tables
  • A diagnostics tool called rnprobe for checking connectivity to destinations
  • A simple file transfer program called rncp making easy to copy files to remote systems
  • The remote command execution program rnx that let's you run commands and programs and retrieve output from remote systems

All tools, including rnx and rncp, work reliably and well even over very low-bandwidth links like LoRa or Packet Radio.

Current Status

Reticulum should currently be considered beta software. All core protocol features are implemented and functioning, but additions will probably occur as real-world use is explored. There will be bugs. The API and wire-format can be considered relatively stable at the moment, but could change if warranted.

Supported interface types and devices

Reticulum implements a range of generalised interface types that covers most of the communications hardware that Reticulum can run over. If your hardware is not supported, it's relatively simple to implement an interface class. I will gratefully accept pull requests for custom interfaces if they are generally useful.

Currently, the following interfaces are supported:

  • Any ethernet device
  • LoRa using RNode
  • Packet Radio TNCs (with or without AX.25)
  • KISS-compatible hardware and software modems
  • Any device with a serial port
  • TCP over IP networks
  • UDP over IP networks
  • External programs via stdio or pipes
  • Custom hardware via stdio or pipes

Development Roadmap

  • Version 0.3.8
    • Improving the manual with sections specifically for beginners
    • Utilities for managing identities, signing and encryption
    • Support for radio and modem interfaces on Android
    • User friendly interface configuration tool
    • Easy way to share interface configurations, see #19
    • More interface types for even broader compatibility
      • Plain ESP32 devices (ESP-Now, WiFi, Bluetooth, etc.)
      • More LoRa transceivers
      • AT-compatible modems
      • IR Transceivers
      • AWDL / OWL
      • HF Modems
      • CAN-bus
      • ZeroMQ
      • MQTT
      • IrDA / IrPHY
      • SPI
      • i²c
  • Version 0.3.9
    • A portable cryptography core, supporting multiple backends
    • Performance optimisations
    • Memory optimisations
  • Planned, but not yet scheduled
    • Globally routable multicast
    • Bindings for other programming languages
    • A portable Reticulum implementation in C, see #21

Dependencies:

  • Python 3.6
  • cryptography.io
  • netifaces
  • pyserial

Public Testnet

If you just want to get started experimenting without building any physical networks, you are welcome to join the Unsigned.io RNS Testnet. The testnet is just that, an informal network for testing and experimenting. It will be up most of the time, and anyone can join, but it also means that there's no guarantees for service availability.

The testnet runs the very latest version of Reticulum (often even a short while before it is publicly released). Sometimes experimental versions of Reticulum might be deployed to nodes on the testnet, which means strange behaviour might occur. If none of that scares you, you can join the testnet via eihter TCP or I2P. Just add one of the following interfaces to your Reticulum configuration file:

# For connecting over TCP/IP:

  [[RNS Testnet Frankfurt]]
    type = TCPClientInterface
    interface_enabled = yes
    outgoing = True
    target_host = frankfurt.rns.unsigned.io
    target_port = 4965


# For connecting over I2P:

  [[RNS Testnet I2P Node A]]
    type = I2PInterface
    interface_enabled = yes
    peers = ykzlw5ujbaqc2xkec4cpvgyxj257wcrmmgkuxqmqcur7cq3w3lha.b32.i2p

The testnet also contains a number of Nomad Network nodes, and LXMF propagation nodes.

Support Reticulum

You can help support the continued development of open, free and private communications systems by donating via one of the following channels:

Are certain features in the development roadmap are important to you or your organisation? Make them a reality quickly by sponsoring their implementation.

Caveat Emptor

Reticulum is relatively young software, and should be considered as such. While it has been built with cryptography best-practices very foremost in mind, it has not been externally security audited, and there could very well be privacy-breaking bugs. If you want to help out, or help sponsor an audit, please do get in touch.