mirror of
https://github.com/markqvist/Reticulum.git
synced 2024-08-22 07:00:29 +00:00
366 lines
16 KiB
ReStructuredText
366 lines
16 KiB
ReStructuredText
********************
|
|
Getting Started Fast
|
|
********************
|
|
|
|
The best way to get started with the Reticulum Network Stack depends on what
|
|
you want to do. This guide will outline sensible starting paths for different
|
|
scenarios.
|
|
|
|
|
|
Try Using a Reticulum-based Program
|
|
=============================================
|
|
|
|
If you simply want to try using a program built with Reticulum, a few different
|
|
programs exist that allow basic communication and a range of other useful functions
|
|
over even extremely low-bandwidth Reticulum networks.
|
|
|
|
These programs will let you get a feel for how Reticulum works. They have been designed
|
|
to run well over networks based on LoRa or packet radio, but can also be used completely
|
|
over local WiFi, wired ethernet, the Internet, or any combination.
|
|
|
|
As such, it is easy to get started experimenting, without having to set up any radio
|
|
transceivers or infrastructure just to try it out. Launching the programs on separate
|
|
devices connected to the same WiFi network is enough to get started, and physical
|
|
radio interfaces can then be added later.
|
|
|
|
Nomad Network
|
|
^^^^^^^^^^^^^
|
|
|
|
The terminal-based program `Nomad Network <https://github.com/markqvist/nomadnet>`_
|
|
provides a complete encrypted communications suite built with Reticulum. It features
|
|
encrypted messaging (both direct and delayed-delivery for offline users), file sharing,
|
|
and has a built-in text-browser and page server with support for dynamically rendered pages,
|
|
user authentication and more.
|
|
|
|
.. image:: screenshots/nomadnet_3.png
|
|
:target: _images/nomadnet_3.png
|
|
|
|
`Nomad Network <https://github.com/markqvist/nomadnet>`_ is a user-facing client
|
|
for the messaging and information-sharing protocol
|
|
`LXMF <https://github.com/markqvist/lxmf>`_, another project built with Reticulum.
|
|
|
|
You can install Nomad Network via pip:
|
|
|
|
.. code::
|
|
|
|
# Install ...
|
|
pip3 install nomadnet
|
|
|
|
# ... and run
|
|
nomadnet
|
|
|
|
**Please Note**: If this is the very first time you use pip to install a program
|
|
on your system, you might need to reboot your system for your program to become
|
|
available. If you get a "command not found" error or similar when running the
|
|
program, reboot your system and try again.
|
|
|
|
Sideband
|
|
^^^^^^^^
|
|
|
|
If you would rather use a program with a graphical user interface, you can take
|
|
a look at `Sideband <https://unsigned.io/sideband>`_, which is available for Android,
|
|
Linux and macOS.
|
|
|
|
.. image:: screenshots/sideband_1.png
|
|
:width: 400px
|
|
:align: center
|
|
:target: _images/sideband_1.png
|
|
|
|
Sideband is currently in the early stages of development, but already provides basic
|
|
communication features, and interoperates with Nomad Network, or any other LXMF client.
|
|
|
|
Using the Included Utilities
|
|
=============================================
|
|
Reticulum comes with a range of included utilities that make it easier to
|
|
manage your network, check connectivity and make Reticulum available to other
|
|
programs on your system.
|
|
|
|
You can use ``rnsd`` to run Reticulum as a background or foreground service,
|
|
and the ``rnstatus``, ``rnpath`` and ``rnprobe`` utilities to view and query
|
|
network status and connectivity.
|
|
|
|
To learn more about these utility programs, have a look at the
|
|
:ref:`Using Reticulum on Your System<using-main>` chapter of this manual.
|
|
|
|
|
|
Creating a Network With Reticulum
|
|
=============================================
|
|
To create a network, you will need to specify one or more *interfaces* for
|
|
Reticulum to use. This is done in the Reticulum configuration file, which by
|
|
default is located at ``~/.reticulum/config``. You can edit this file by hand,
|
|
or use the interactive ``rnsconfig`` utility.
|
|
|
|
When Reticulum is started for the first time, it will create a default
|
|
configuration file, with one active interface. This default interface uses
|
|
your existing ethernet and WiFi networks (if any), and only allows you to
|
|
communicate with other Reticulum peers within your local broadcast domains.
|
|
|
|
To communicate further, you will have to add one or more interfaces. The default
|
|
configuration includes a number of examples, ranging from using TCP over the
|
|
internet, to LoRa and Packet Radio interfaces.
|
|
|
|
With Reticulum, you only need to configure what interfaces you want to communicate
|
|
over. There is no need to configure address spaces, subnets, routing tables,
|
|
or other things you might be used to from other network types.
|
|
|
|
Once Reticulum knows which interfaces it should use, it will automatically
|
|
discover topography and configure transport of data to any destinations it
|
|
knows about.
|
|
|
|
In situations where you already have an established WiFi or ethernet network, and
|
|
many devices that want to utilise the same external Reticulum network paths (for example over
|
|
LoRa), it will often be sufficient to let one system act as a Reticulum gateway, by
|
|
adding any external interfaces to the configuration of this system, and then enabling transport on it. Any
|
|
other device on your local WiFi will then be able to connect to this wider Reticulum
|
|
network just using the default (:ref:`AutoInterface<interfaces-auto>`) configuration.
|
|
|
|
Possibly, the examples in the config file are enough to get you started. If
|
|
you want more information, you can read the :ref:`Building Networks<networks-main>`
|
|
and :ref:`Interfaces<interfaces-main>` chapters of this manual.
|
|
|
|
Connecting Reticulum Instances Over the Internet
|
|
================================================
|
|
Reticulum currently offers two interfaces suitable for connecting instances over the Internet: :ref:`TCP<interfaces-tcps>`
|
|
and :ref:`I2P<interfaces-i2p>`. Each interface offers a different set of features, and Reticulum
|
|
users should carefully choose the interface which best suites their needs.
|
|
|
|
The ``TCPServerInterface`` allows users to host an instance accessible over TCP/IP. This
|
|
method is generally faster, lower latency, and more energy efficient than using ``I2PInterface``,
|
|
however it also leaks more data about the server host.
|
|
|
|
TCP connections reveal the IP address of both your instance and the server to anyone who can
|
|
inspect the connection. Someone could use this information to determine your location or identity. Adversaries
|
|
inspecting your packets may be able to record packet metadata like time of transmission and packet size.
|
|
Even though Reticulum encrypts traffic, TCP does not, so an adversary may be able to use
|
|
packet inspection to learn that a system is running Reticulum, and what other IP adresses connect to it.
|
|
Hosting a publicly reachable instance over TCP also requires a publicly reachable IP address,
|
|
which most Internet connections don't offer anymore.
|
|
|
|
The ``I2PInterface`` routes messages through the `Invisible Internet Protocol
|
|
(I2P) <https://geti2p.net/en/>`_. To use this interface, users must also run an I2P daemon in
|
|
parallel to ``rnsd``. For always-on I2P nodes it is recommended to use `i2pd <https://i2pd.website/>`_.
|
|
|
|
By default, I2P will encrypt and mix all traffic sent over the Internet, and
|
|
hide both the sender and receiver Reticulum instance IP addresses. Running an I2P node
|
|
will also relay other I2P user's encrypted packets, which will use extra
|
|
bandwidth and compute power, but also makes timing attacks and other forms of
|
|
deep-packet-inspection much more difficult.
|
|
|
|
I2P also allows users to host globally available Reticulum instances from non-public IPs and behind firewalls and NAT.
|
|
|
|
In general it is recommended to use an I2P node if you want to host a publically accessible
|
|
instance, while preserving anonymity. If you care more about performance, and a slightly
|
|
easier setup, use TCP.
|
|
|
|
|
|
Connect to the Public Testnet
|
|
===========================================
|
|
|
|
An experimental public testnet has been made accessible over both I2P and TCP. You can join it
|
|
by adding one of the following interfaces to your ``.reticulum/config`` file:
|
|
|
|
.. code::
|
|
|
|
# For connecting over TCP/IP:
|
|
[[RNS Testnet Frankfurt]]
|
|
type = TCPClientInterface
|
|
interface_enabled = yes
|
|
outgoing = True
|
|
target_host = frankfurt.rns.unsigned.io
|
|
target_port = 4965
|
|
|
|
|
|
# For connecting over I2P:
|
|
[[RNS Testnet I2P Node A]]
|
|
type = I2PInterface
|
|
interface_enabled = yes
|
|
peers = ykzlw5ujbaqc2xkec4cpvgyxj257wcrmmgkuxqmqcur7cq3w3lha.b32.i2p
|
|
|
|
Many other Reticulum instances are connecting to this testnet, and you can also join it
|
|
via other entry points if you know them. There is absolutely no control over the network
|
|
topography, usage or what types of instances connect. It will also occasionally be used
|
|
to test various failure scenarios, and there are no availability or service guarantees.
|
|
|
|
|
|
Adding Radio Interfaces
|
|
==============================================
|
|
Once you have Reticulum installed and working, you can add radio interfaces with
|
|
any compatible hardware you have available. Reticulum supports a wide range of radio
|
|
hardware, and if you already have any available, it is very likely that it will
|
|
work with Reticulum. For information on how to configure this, see the
|
|
:ref:`Interfaces<interfaces-main>` section of this manual.
|
|
|
|
If you do not already have transceiver hardware available, you can easily and
|
|
cheaply build an :ref:`RNode<rnode-main>`, which is a general-purpose long-range
|
|
digital radio transceiver, that integrates easily with Reticulum.
|
|
|
|
To build one yourself requires installing a custom firmware on a supported LoRa
|
|
development board with an auto-install script. Please see the :ref:`Communications Hardware<hardware-main>`
|
|
chapter for a guide. If you prefer purchasing a ready-made unit, you can refer to the
|
|
:ref:`list of suppliers<rnode-suppliers>`. For more information on RNode, you can also
|
|
refer to these additional external resources:
|
|
|
|
* `How To Make Your Own RNodes <https://unsigned.io/how-to-make-your-own-rnodes/>`_
|
|
* `Installing RNode Firmware on Compatible LoRa Devices <https://unsigned.io/installing-rnode-firmware-on-t-beam-and-lora32-devices/>`_
|
|
* `Private, Secure and Uncensorable Messaging Over a LoRa Mesh <https://unsigned.io/private-messaging-over-lora/>`_
|
|
* `RNode Firmware <https://github.com/markqvist/RNode_Firmware/>`_
|
|
|
|
If you have communications hardware that is not already supported by any of the
|
|
:ref:`existing interface types<interfaces-main>`, but you think would be suitable for use with Reticulum,
|
|
you are welcome to head over to the `GitHub discussion pages <https://github.com/markqvist/Reticulum/discussions>`_
|
|
and propose adding an interface for the hardware.
|
|
|
|
|
|
Develop a Program with Reticulum
|
|
===========================================
|
|
If you want to develop programs that use Reticulum, the easiest way to get
|
|
started is to install the latest release of Reticulum via pip:
|
|
|
|
.. code::
|
|
|
|
pip3 install rns
|
|
|
|
The above command will install Reticulum and dependencies, and you will be
|
|
ready to import and use RNS in your own programs. The next step will most
|
|
likely be to look at some :ref:`Example Programs<examples-main>`.
|
|
|
|
For extended functionality, you can install optional dependencies:
|
|
|
|
.. code::
|
|
|
|
pip3 install pyserial netifaces
|
|
|
|
|
|
Further information can be found in the :ref:`API Reference<api-main>`.
|
|
|
|
|
|
Participate in Reticulum Development
|
|
==============================================
|
|
If you want to participate in the development of Reticulum and associated
|
|
utilities, you'll want to get the latest source from GitHub. In that case,
|
|
don't use pip, but try this recipe:
|
|
|
|
.. code::
|
|
|
|
# Install dependencies
|
|
pip3 install cryptography pyserial netifaces
|
|
|
|
# Clone repository
|
|
git clone https://github.com/markqvist/Reticulum.git
|
|
|
|
# Move into Reticulum folder and symlink library to examples folder
|
|
cd Reticulum
|
|
ln -s ../RNS ./Examples/
|
|
|
|
# Run an example
|
|
python3 Examples/Echo.py -s
|
|
|
|
# Unless you've manually created a config file, Reticulum will do so now,
|
|
# and immediately exit. Make any necessary changes to the file:
|
|
nano ~/.reticulum/config
|
|
|
|
# ... and launch the example again.
|
|
python3 Examples/Echo.py -s
|
|
|
|
# You can now repeat the process on another computer,
|
|
# and run the same example with -h to get command line options.
|
|
python3 Examples/Echo.py -h
|
|
|
|
# Run the example in client mode to "ping" the server.
|
|
# Replace the hash below with the actual destination hash of your server.
|
|
python3 Examples/Echo.py 3e12fc71692f8ec47bc5
|
|
|
|
# Have a look at another example
|
|
python3 Examples/Filetransfer.py -h
|
|
|
|
When you have experimented with the basic examples, it's time to go read the
|
|
:ref:`Understanding Reticulum<understanding-main>` chapter.
|
|
|
|
|
|
Reticulum on ARM64
|
|
==============================================
|
|
On some architectures, including ARM64, not all dependencies have precompiled
|
|
binaries. On such systems, you will need to install ``python3-dev`` before
|
|
installing Reticulum or programs that depend on Reticulum.
|
|
|
|
.. code::
|
|
|
|
# Install Python and development packages
|
|
sudo apt update
|
|
sudo apt install python3 python3-pip python3-dev
|
|
|
|
# Install Reticulum
|
|
python3 -m pip install rns
|
|
|
|
|
|
Reticulum on Android
|
|
==============================================
|
|
Reticulum can be used on Android in different ways. The easiest way to get
|
|
started is using an app like `Sideband <https://unsigned.io/sideband>`_.
|
|
|
|
For more control and features, you can use Reticulum and related programs via
|
|
the `Termux app <https://termux.com/>`_, at the time of writing available on
|
|
`F-droid <https://f-droid.org>`_.
|
|
|
|
Termux is a terminal emulator and Linux environment for Android based devices,
|
|
which includes the ability to use many different programs and libraries,
|
|
including Reticulum.
|
|
|
|
Since the Python cryptography.io module does not offer pre-built wheels for
|
|
Android, the standard one-line install of Reticulum does not work on Android,
|
|
and a few extra commands are required.
|
|
|
|
From within Termux, execute the following:
|
|
|
|
.. code::
|
|
|
|
# First, make sure indexes and packages are up to date.
|
|
pkg update
|
|
pkg upgrade
|
|
|
|
# Then install dependencies for the cryptography library.
|
|
pkg install python build-essential openssl libffi rust
|
|
|
|
# Make sure pip is up to date, and install the wheel module.
|
|
pip3 install wheel pip --upgrade
|
|
|
|
# To allow the installer to build the cryptography module,
|
|
# we need to let it know what platform we are compiling for:
|
|
export CARGO_BUILD_TARGET="aarch64-linux-android"
|
|
|
|
# Start the install process for the cryptography module.
|
|
# Depending on your device, this can take several minutes,
|
|
# since the module must be compiled locally on your device.
|
|
pip3 install cryptography
|
|
|
|
# If the above installation succeeds, you can now install
|
|
# Reticulum and any related software
|
|
pip3 install rns
|
|
|
|
It is also possible to include Reticulum in apps compiled and distributed as
|
|
Android APKs. A detailed tutorial and example source code will be included
|
|
here at a later point.
|
|
|
|
Pure-Python Reticulum
|
|
==============================================
|
|
In some rare cases, and on more obscure system types, it is not possible to
|
|
install one or more dependencies
|
|
|
|
On more unusual systems, and in some rare cases, it might not be possible to
|
|
install or even compile one or more of the above modules. In such situations,
|
|
you can use the ``rnspure`` package instead of the ``rns`` package. The ``rnspure``
|
|
package requires no external dependencies for installation. Please note that the
|
|
actual contents of the ``rns`` and ``rnspure`` packages are *completely identical*.
|
|
The only difference is that the ``rnspure`` package lists no dependencies required
|
|
for installation.
|
|
|
|
No matter how Reticulum is installed and started, it will load external dependencies
|
|
only if they are *needed* and *available*. If for example you want to use Reticulum
|
|
on a system that cannot support ``pyserial``, it is perfectly possible to do so using
|
|
the `rnspure` package, but Reticulum will not be able to use serial-based interfaces.
|
|
All other available modules will still be loaded when needed.
|
|
|
|
**Please Note!** If you use the `rnspure` package to run Reticulum on systems that
|
|
do not support `PyCA/cryptography <https://github.com/pyca/cryptography>`_, it is
|
|
important that you read and understand the :ref:`Cryptographic Primitives <understanding-primitives>`
|
|
section of this manual. |