from .Interface import Interface
from time import sleep
import sys
import serial
import threading
import time
import math
import RNS

class KISS():
	FEND			= 0xC0
	FESC			= 0xDB
	TFEND			= 0xDC
	TFESC			= 0xDD
	
	CMD_UNKNOWN		= 0xFE
	CMD_DATA		= 0x00
	CMD_FREQUENCY	= 0x01
	CMD_BANDWIDTH	= 0x02
	CMD_TXPOWER		= 0x03
	CMD_SF			= 0x04
	CMD_CR          = 0x05
	CMD_RADIO_STATE = 0x06
	CMD_RADIO_LOCK	= 0x07
	CMD_DETECT		= 0x08
	CMD_READY       = 0x0F
	CMD_STAT_RX		= 0x21
	CMD_STAT_TX		= 0x22
	CMD_STAT_RSSI	= 0x23
	CMD_STAT_SNR	= 0x24
	CMD_BLINK		= 0x30
	CMD_RANDOM		= 0x40
	CMD_FW_VERSION  = 0x50
	CMD_ROM_READ    = 0x51

	DETECT_REQ      = 0x73
	DETECT_RESP     = 0x46
	
	RADIO_STATE_OFF = 0x00
	RADIO_STATE_ON	= 0x01
	RADIO_STATE_ASK = 0xFF
	
	CMD_ERROR		    = 0x90
	ERROR_INITRADIO     = 0x01
	ERROR_TXFAILED	    = 0x02
	ERROR_EEPROM_LOCKED	= 0x03

	@staticmethod
	def escape(data):
		data = data.replace(bytes([0xdb]), bytes([0xdb, 0xdd]))
		data = data.replace(bytes([0xc0]), bytes([0xdb, 0xdc]))
		return data
	

class RNodeInterface(Interface):
	MAX_CHUNK = 32768

	owner    = None
	port     = None
	speed    = None
	databits = None
	parity   = None
	stopbits = None
	serial   = None

	FREQ_MIN = 137000000
	FREQ_MAX = 1020000000

	RSSI_OFFSET = 157
	SNR_OFFSET  = 128

	def __init__(self, owner, name, port, frequency = None, bandwidth = None, txpower = None, sf = None, cr = None, flow_control = False):
		self.serial      = None
		self.owner       = owner
		self.name        = name
		self.port        = port
		self.speed       = 115200
		self.databits    = 8
		self.parity      = serial.PARITY_NONE
		self.stopbits    = 1
		self.timeout     = 100
		self.online      = False

		self.frequency   = frequency
		self.bandwidth   = bandwidth
		self.txpower     = txpower
		self.sf          = sf
		self.cr          = cr
		self.state       = KISS.RADIO_STATE_OFF
		self.bitrate     = 0

		self.r_frequency = None
		self.r_bandwidth = None
		self.r_txpower   = None
		self.r_sf        = None
		self.r_cr        = None
		self.r_state     = None
		self.r_lock      = None
		self.r_stat_rx   = None
		self.r_stat_tx   = None
		self.r_stat_rssi = None
		self.r_random	 = None

		self.packet_queue    = []
		self.flow_control    = flow_control
		self.interface_ready = False

		self.validcfg  = True
		if (self.frequency < RNodeInterface.FREQ_MIN or self.frequency > RNodeInterface.FREQ_MAX):
			RNS.log("Invalid frequency configured for "+str(self), RNS.LOG_ERROR)
			self.validcfg = False

		if (self.txpower < 0 or self.txpower > 17):
			RNS.log("Invalid TX power configured for "+str(self), RNS.LOG_ERROR)
			self.validcfg = False

		if (self.bandwidth < 7800 or self.bandwidth > 500000):
			RNS.log("Invalid bandwidth configured for "+str(self), RNS.LOG_ERROR)
			self.validcfg = False

		if (self.sf < 7 or self.sf > 12):
			RNS.log("Invalid spreading factor configured for "+str(self), RNS.LOG_ERROR)
			self.validcfg = False

		if (self.cr < 5 or self.sf > 8):
			RNS.log("Invalid coding rate configured for "+str(self), RNS.LOG_ERROR)
			self.validcfg = False

		if (not self.validcfg):
			raise ValueError("The configuration for "+str(self)+" contains errors, interface is offline")

		try:
			RNS.log("Opening serial port "+self.port+"...")
			self.serial = serial.Serial(
				port = self.port,
				baudrate = self.speed,
				bytesize = self.databits,
				parity = self.parity,
				stopbits = self.stopbits,
				xonxoff = False,
				rtscts = False,
				timeout = 0,
				inter_byte_timeout = None,
				write_timeout = None,
				dsrdtr = False,
			)
		except Exception as e:
			RNS.log("Could not open serial port for interface "+str(self), RNS.LOG_ERROR)
			raise e

		if self.serial.is_open:
			sleep(2.0)
			thread = threading.Thread(target=self.readLoop)
			thread.setDaemon(True)
			thread.start()
			self.online = True
			RNS.log("Serial port "+self.port+" is now open")
			RNS.log("Configuring RNode interface...", RNS.LOG_VERBOSE)
			self.initRadio()
			if (self.validateRadioState()):
				self.interface_ready = True
				RNS.log(str(self)+" is configured and powered up")
				sleep(1.0)
			else:
				RNS.log("After configuring "+str(self)+", the reported radio parameters did not match your configuration.", RNS.LOG_ERROR)
				RNS.log("Make sure that your hardware actually supports the parameters specified in the configuration", RNS.LOG_ERROR)
				RNS.log("Aborting RNode startup", RNS.LOG_ERROR)
				self.serial.close()
				raise IOError("RNode interface did not pass validation")
		else:
			raise IOError("Could not open serial port")


	def initRadio(self):
		self.setFrequency()
		self.setBandwidth()
		self.setTXPower()
		self.setSpreadingFactor()
		self.setRadioState(KISS.RADIO_STATE_ON)

	def setFrequency(self):
		c1 = self.frequency >> 24
		c2 = self.frequency >> 16 & 0xFF
		c3 = self.frequency >> 8 & 0xFF
		c4 = self.frequency & 0xFF
		data = KISS.escape(bytes([c1])+bytes([c2])+bytes([c3])+bytes([c4]))

		kiss_command = bytes([KISS.FEND])+bytes([KISS.CMD_FREQUENCY])+data+bytes([KISS.FEND])
		written = self.serial.write(kiss_command)
		if written != len(kiss_command):
			raise IOError("An IO error occurred while configuring frequency for "+self(str))

	def setBandwidth(self):
		c1 = self.bandwidth >> 24
		c2 = self.bandwidth >> 16 & 0xFF
		c3 = self.bandwidth >> 8 & 0xFF
		c4 = self.bandwidth & 0xFF
		data = KISS.escape(bytes([c1])+bytes([c2])+bytes([c3])+bytes([c4]))

		kiss_command = bytes([KISS.FEND])+bytes([KISS.CMD_BANDWIDTH])+data+bytes([KISS.FEND])
		written = self.serial.write(kiss_command)
		if written != len(kiss_command):
			raise IOError("An IO error occurred while configuring bandwidth for "+self(str))

	def setTXPower(self):
		txp = bytes([self.txpower])

		kiss_command = bytes([KISS.FEND])+bytes([KISS.CMD_TXPOWER])+txp+bytes([KISS.FEND])
		written = self.serial.write(kiss_command)
		if written != len(kiss_command):
			raise IOError("An IO error occurred while configuring TX power for "+self(str))

	def setSpreadingFactor(self):
		sf = bytes([self.sf])

		kiss_command = bytes([KISS.FEND])+bytes([KISS.CMD_SF])+sf+bytes([KISS.FEND])
		written = self.serial.write(kiss_command)
		if written != len(kiss_command):
			raise IOError("An IO error occurred while configuring spreading factor for "+self(str))

	def setCodingRate(self):
		cr = bytes([self.cr])

		kiss_command = bytes([KISS.FEND])+bytes([KISS.CMD_CR])+cr+bytes([KISS.FEND])
		written = self.serial.write(kiss_command)
		if written != len(kiss_command):
			raise IOError("An IO error occurred while configuring coding rate for "+self(str))

	def setRadioState(self, state):
		kiss_command = bytes([KISS.FEND])+bytes([KISS.CMD_RADIO_STATE])+bytes([state])+bytes([KISS.FEND])
		written = self.serial.write(kiss_command)
		if written != len(kiss_command):
			raise IOError("An IO error occurred while configuring radio state for "+self(str))

	def validateRadioState(self):
		RNS.log("Validating radio configuration for "+str(self)+"...", RNS.LOG_VERBOSE)
		sleep(0.25);
		if (self.frequency != self.r_frequency):
			RNS.log("Frequency mismatch", RNS.LOG_ERROR)
			self.validcfg = False
		if (self.bandwidth != self.r_bandwidth):
			RNS.log("Bandwidth mismatch", RNS.LOG_ERROR)
			self.validcfg = False
		if (self.txpower != self.r_txpower):
			RNS.log("TX power mismatch", RNS.LOG_ERROR)
			self.validcfg = False
		if (self.sf != self.r_sf):
			RNS.log("Spreading factor mismatch", RNS.LOG_ERROR)
			self.validcfg = False

		if (self.validcfg):
			return True
		else:
			return False


	def updateBitrate(self):
		try:
			self.bitrate = self.r_sf * ( (4.0/self.cr) / (math.pow(2,self.r_sf)/(self.r_bandwidth/1000)) ) * 1000
			self.bitrate_kbps = round(self.bitrate/1000.0, 2)
			RNS.log(str(self)+" On-air bitrate is now "+str(self.bitrate_kbps)+ " kbps", RNS.LOG_DEBUG)
		except:
			self.bitrate = 0

	def processIncoming(self, data):
		self.owner.inbound(data, self)


	def processOutgoing(self,data):
		if self.online:
			if self.interface_ready:
				if self.flow_control:
					self.interface_ready = False

				data = KISS.escape(data)
				frame = bytes([0xc0])+bytes([0x00])+data+bytes([0xc0])
				written = self.serial.write(frame)
				if written != len(frame):
					raise IOError("Serial interface only wrote "+str(written)+" bytes of "+str(len(data)))
			else:
				self.queue(data)

	def queue(self, data):
		self.packet_queue.append(data)

	def process_queue(self):
		if len(self.packet_queue) > 0:
			data = self.packet_queue.pop(0)
			self.interface_ready = True
			self.processOutgoing(data)
		elif len(self.packet_queue) == 0:
			self.interface_ready = True

	def readLoop(self):
		try:
			in_frame = False
			escape = False
			command = KISS.CMD_UNKNOWN
			data_buffer = b""
			command_buffer = b""
			last_read_ms = int(time.time()*1000)

			while self.serial.is_open:
				if self.serial.in_waiting:
					byte = ord(self.serial.read(1))
					last_read_ms = int(time.time()*1000)

					if (in_frame and byte == KISS.FEND and command == KISS.CMD_DATA):
						in_frame = False
						self.processIncoming(data_buffer)
						data_buffer = b""
						command_buffer = b""
					elif (byte == KISS.FEND):
						in_frame = True
						command = KISS.CMD_UNKNOWN
						data_buffer = b""
						command_buffer = b""
					elif (in_frame and len(data_buffer) < RNS.Reticulum.MTU):
						if (len(data_buffer) == 0 and command == KISS.CMD_UNKNOWN):
							command = byte
						elif (command == KISS.CMD_DATA):
							if (byte == KISS.FESC):
								escape = True
							else:
								if (escape):
									if (byte == KISS.TFEND):
										byte = KISS.FEND
									if (byte == KISS.TFESC):
										byte = KISS.FESC
									escape = False
								data_buffer = data_buffer+bytes([byte])
						elif (command == KISS.CMD_FREQUENCY):
							if (byte == KISS.FESC):
								escape = True
							else:
								if (escape):
									if (byte == KISS.TFEND):
										byte = KISS.FEND
									if (byte == KISS.TFESC):
										byte = KISS.FESC
									escape = False
								command_buffer = command_buffer+bytes([byte])
								if (len(command_buffer) == 4):
									self.r_frequency = command_buffer[0] << 24 | command_buffer[1] << 16 | command_buffer[2] << 8 | command_buffer[3]
									RNS.log(str(self)+" Radio reporting frequency is "+str(self.r_frequency/1000000.0)+" MHz", RNS.LOG_DEBUG)
									self.updateBitrate()

						elif (command == KISS.CMD_BANDWIDTH):
							if (byte == KISS.FESC):
								escape = True
							else:
								if (escape):
									if (byte == KISS.TFEND):
										byte = KISS.FEND
									if (byte == KISS.TFESC):
										byte = KISS.FESC
									escape = False
								command_buffer = command_buffer+bytes([byte])
								if (len(command_buffer) == 4):
									self.r_bandwidth = command_buffer[0] << 24 | command_buffer[1] << 16 | command_buffer[2] << 8 | command_buffer[3]
									RNS.log(str(self)+" Radio reporting bandwidth is "+str(self.r_bandwidth/1000.0)+" KHz", RNS.LOG_DEBUG)
									self.updateBitrate()

						elif (command == KISS.CMD_TXPOWER):
							self.r_txpower = byte
							RNS.log(str(self)+" Radio reporting TX power is "+str(self.r_txpower)+" dBm", RNS.LOG_DEBUG)
						elif (command == KISS.CMD_SF):
							self.r_sf = byte
							RNS.log(str(self)+" Radio reporting spreading factor is "+str(self.r_sf), RNS.LOG_DEBUG)
							self.updateBitrate()
						elif (command == KISS.CMD_CR):
							self.r_cr = byte
							RNS.log(str(self)+" Radio reporting coding rate is "+str(self.r_cr), RNS.LOG_DEBUG)
							self.updateBitrate()
						elif (command == KISS.CMD_RADIO_STATE):
							self.r_state = byte
						elif (command == KISS.CMD_RADIO_LOCK):
							self.r_lock = byte
						elif (command == KISS.CMD_STAT_RX):
							if (byte == KISS.FESC):
								escape = True
							else:
								if (escape):
									if (byte == KISS.TFEND):
										byte = KISS.FEND
									if (byte == KISS.TFESC):
										byte = KISS.FESC
									escape = False
								command_buffer = command_buffer+bytes([byte])
								if (len(command_buffer) == 4):
									self.r_stat_rx = ord(command_buffer[0]) << 24 | ord(command_buffer[1]) << 16 | ord(command_buffer[2]) << 8 | ord(command_buffer[3])

						elif (command == KISS.CMD_STAT_TX):
							if (byte == KISS.FESC):
								escape = True
							else:
								if (escape):
									if (byte == KISS.TFEND):
										byte = KISS.FEND
									if (byte == KISS.TFESC):
										byte = KISS.FESC
									escape = False
								command_buffer = command_buffer+bytes([byte])
								if (len(command_buffer) == 4):
									self.r_stat_tx = ord(command_buffer[0]) << 24 | ord(command_buffer[1]) << 16 | ord(command_buffer[2]) << 8 | ord(command_buffer[3])

						elif (command == KISS.CMD_STAT_RSSI):
							self.r_stat_rssi = byte-RNodeInterface.RSSI_OFFSET
						elif (command == KISS.CMD_STAT_SNR):
							self.r_stat_snr = byte-RNodeInterface.SNR_OFFSET
						elif (command == KISS.CMD_RANDOM):
							self.r_random = byte
						elif (command == KISS.CMD_ERROR):
							if (byte == KISS.ERROR_INITRADIO):
								RNS.log(str(self)+" hardware initialisation error (code "+RNS.hexrep(byte)+")", RNS.LOG_ERROR)
							elif (byte == KISS.ERROR_INITRADIO):
								RNS.log(str(self)+" hardware TX error (code "+RNS.hexrep(byte)+")", RNS.LOG_ERROR)
							else:
								RNS.log(str(self)+" hardware error (code "+RNS.hexrep(byte)+")", RNS.LOG_ERROR)
						elif (command == KISS.CMD_READY):
							self.process_queue()
						
				else:
					time_since_last = int(time.time()*1000) - last_read_ms
					if len(data_buffer) > 0 and time_since_last > self.timeout:
						RNS.log(str(self)+" serial read timeout", RNS.LOG_DEBUG)
						data_buffer = b""
						in_frame = False
						command = KISS.CMD_UNKNOWN
						escape = False
					sleep(0.08)

		except Exception as e:
			self.online = False
			RNS.log("A serial port error occurred, the contained exception was: "+str(e), RNS.LOG_ERROR)
			RNS.log("The interface "+str(self.name)+" is now offline. Restart Reticulum to attempt reconnection.", RNS.LOG_ERROR)

	def __str__(self):
		return "RNodeInterface["+self.name+"]"