Changed rnodeconf autoinstaller menu order

Add product and model, plus support for Heltec V3 serial only setup to rnodeconf.

RNS/Utilities/rnodeconf.py

@@ -157,6 +157,10 @@ class ROM():
     MODEL_C4       = 0xC4
     MODEL_C9       = 0xC9
 
+    PRODUCT_H32_V3 = 0xC1
+    MODEL_C5       = 0xC5
+    MODEL_CA       = 0xCA
+
     PRODUCT_TBEAM  = 0xE0
     MODEL_E4       = 0xE4
     MODEL_E9       = 0xE9
@@ -203,6 +207,7 @@ products = {
     ROM.PRODUCT_T32_20: "LilyGO LoRa32 v2.0",
     ROM.PRODUCT_T32_21: "LilyGO LoRa32 v2.1",
     ROM.PRODUCT_H32_V2: "Heltec LoRa32 v2",
+    ROM.PRODUCT_H32_V3: "Heltec LoRa32 v3",
 }
 
 platforms = {
@@ -237,6 +242,8 @@ models = {
     0xBB: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v10.zip", "SX1276"],
     0xC4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_heltec32v2.zip", "SX1278"],
     0xC9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_heltec32v2.zip", "SX1276"],
+    0xC5: [470000000, 510000000, 21, "470 - 510 MHz", "rnode_firmware_heltec32v3.zip", "SX1262"],
+    0xCA: [863000000, 928000000, 21, "863 - 928 MHz", "rnode_firmware_heltec32v3.zip", "SX1262"],
     0xE4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_tbeam.zip", "SX1278"],
     0xE9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_tbeam.zip", "SX1276"],
     0xE3: [420000000, 520000000, 22, "420 - 520 MHz", "rnode_firmware_tbeam_sx1262.zip", "SX1268"],
@@ -1552,7 +1559,8 @@ def main():
             print("[5] LilyGO LoRa32 v1.0")
             print("[6] LilyGO T-Beam")
             print("[7] Heltec LoRa32 v2")
-            print("[8] LilyGO LoRa T3S3")
+            print("[8] Heltec LoRa32 v3")
+            print("[9] LilyGO LoRa T3S3")
             print("       .")
             print("      / \\   Select one of these options if you want to easily turn")
             print("       |    a supported development board into an RNode.")
@@ -1564,7 +1572,7 @@ def main():
             try:
                 c_dev = int(input())
                 c_mod = False
-                if c_dev < 1 or c_dev > 8:
+                if c_dev < 1 or c_dev > 9:
                     raise ValueError()
                 elif c_dev == 1:
                     selected_product = ROM.PRODUCT_RNODE
@@ -1664,7 +1672,7 @@ def main():
                     print("who would like to experiment with it. Hit enter to continue.")
                     print("---------------------------------------------------------------------------")
                     input()
-                elif c_dev == 8:
+                elif c_dev == 9:
                     selected_product = ROM.PRODUCT_RNODE
                     c_mod = True
                     clear()
@@ -1681,6 +1689,22 @@ def main():
                     print("who would like to experiment with it. Hit enter to continue.")
                     print("---------------------------------------------------------------------------")
                     input()
+                elif c_dev == 8:
+                    selected_product = ROM.PRODUCT_H32_V3
+                    clear()
+                    print("")
+                    print("---------------------------------------------------------------------------")
+                    print("                     Heltec LoRa32 v3.0 RNode Installer")
+                    print("")
+                    print("Important! Using RNode firmware on Heltec devices should currently be")
+                    print("considered experimental. It is not intended for production or critical use.")
+                    print("")
+                    print("Please note that Bluetooth is currently not implemented on this board.")
+                    print("")
+                    print("The currently supplied firmware is provided AS-IS as a courtesey to those")
+                    print("who would like to experiment with it. Hit enter to continue.")
+                    print("---------------------------------------------------------------------------")
+                    input()
             except Exception as e:
                 print("That device type does not exist, exiting now.")
                 exit()
@@ -1928,6 +1952,28 @@ def main():
                     print("That band does not exist, exiting now.")
                     exit()
 
+            elif selected_product == ROM.PRODUCT_H32_V3:
+                selected_mcu = ROM.MCU_ESP32
+                print("\nWhat band is this Heltec LoRa32 V3 for?\n")
+                print("[1] 433 MHz")
+                print("[2] 868 MHz")
+                print("[3] 915 MHz")
+                print("[4] 923 MHz")
+                print("\n? ", end="")
+                try:
+                    c_model = int(input())
+                    if c_model < 1 or c_model > 4:
+                        raise ValueError()
+                    elif c_model == 1:
+                        selected_model = ROM.MODEL_C5
+                        selected_platform = ROM.PLATFORM_ESP32
+                    elif c_model > 1:
+                        selected_model = ROM.MODEL_CA
+                        selected_platform = ROM.PLATFORM_ESP32
+                except Exception as e:
+                    print("That band does not exist, exiting now.")
+                    exit()
+
             if selected_model != ROM.MODEL_FF and selected_model != ROM.MODEL_FE:
                 fw_filename = models[selected_model][4]
 
@@ -2414,6 +2460,23 @@ def main():
                                 "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_heltec32v2.bin",
                                 "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_heltec32v2.partitions",
                             ]
+                    elif fw_filename == "rnode_firmware_heltec32v3.zip":
+                        return [
+                            sys.executable, flasher,
+                            "--chip", "esp32-s3",
+                            "--port", args.port,
+                            "--baud", args.baud_flash,
+                            "--before", "default_reset",
+                            "--after", "hard_reset",
+                            "write_flash", "-z",
+                            "--flash_mode", "dio",
+                            "--flash_freq", "80m",
+                            "--flash_size", "8MB",
+                            "0xe000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_heltec32v3.boot_app0",
+                            "0x0",  UPD_DIR+"/"+selected_version+"/rnode_firmware_heltec32v3.bootloader",
+                            "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_heltec32v3.bin",
+                            "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_heltec32v3.partitions",
+                        ]
                     elif fw_filename == "rnode_firmware_featheresp32.zip":
                         if numeric_version >= 1.55:
                             return [