Merge 9a97195b8c into f461a7827b

RNS/Interfaces/RNodeInterface.py

@@ -491,6 +491,9 @@ class RNodeInterface(Interface):
             raise IOError("An IO error occurred while configuring radio state for "+str(self))
 
     def validate_firmware(self):
+        if (self.maj_version > RNodeInterface.REQUIRED_FW_VER_MAJ):
+            self.firmware_ok = True
+        else:
             if (self.maj_version >= RNodeInterface.REQUIRED_FW_VER_MAJ):
                 if (self.min_version >= RNodeInterface.REQUIRED_FW_VER_MIN):
                     self.firmware_ok = True

RNS/Interfaces/RNodeMultiInterface.py

@@ -249,6 +249,7 @@ class RNodeMultiInterface(Interface):
         if (not self.validcfg):
             raise ValueError("The configuration for "+str(self)+" contains errors, interface is offline")
 
+    def start(self):
         try:
             self.open_port()
 
@@ -323,8 +324,8 @@ class RNodeMultiInterface(Interface):
                         lt_alock=subint[9]
                 )
 
-                interface.OUT = self.OUT
-                interface.IN  = self.IN
+                interface.OUT = subint[10]
+                interface.IN  = True
                 
                 interface.announce_rate_target = self.announce_rate_target
                 interface.mode = self.mode
@@ -1006,6 +1007,11 @@ class RNodeSubInterface(Interface):
         self.parent_interface = parent_interface
         self.announce_rate_target = None
 
+        self.mode = None
+        self.announce_cap = None
+        self.bitrate = None
+        self.ifac_size = None
+
         # add this interface to the subinterfaces array
         self.parent_interface.subinterfaces[index] = self
 

RNS/Reticulum.py

@@ -991,7 +991,7 @@ class Reticulum:
                                                 enabled_count += 1
 
                                     # Create an array with a row for each subinterface
-                                    subint_config = [[0 for x in range(10)] for y in range(enabled_count)]
+                                    subint_config = [[0 for x in range(11)] for y in range(enabled_count)]
                                     subint_index = 0
 
                                     for subinterface in c:
@@ -1020,6 +1020,11 @@ class Reticulum:
                                                 subint_config[subint_index][8] = st_alock
                                                 lt_alock = float(subinterface_config["airtime_limit_long"]) if "airtime_limit_long" in subinterface_config else None
                                                 subint_config[subint_index][9] = lt_alock
+
+                                                if "outgoing" in subinterface_config and subinterface_config.as_bool("outgoing") == False:
+                                                    subint_config[subint_index][10] = False
+                                                else:
+                                                    subint_config[subint_index][10] = True
                                                 subint_index += 1
 
                                     # if no subinterfaces are defined
@@ -1045,10 +1050,8 @@ class Reticulum:
                                         id_callsign = id_callsign
                                     )
 
-                                    if "outgoing" in c and c.as_bool("outgoing") == False:
+                                    interface.IN = False
                                     interface.OUT = False
-                                    else:
-                                        interface.OUT = True
 
                                     interface.mode = interface_mode
 
@@ -1099,6 +1102,9 @@ class Reticulum:
 
                                     RNS.Transport.interfaces.append(interface)
 
+                                    if isinstance(interface, RNS.Interfaces.RNodeMultiInterface.RNodeMultiInterface):
+                                        interface.start()
+
                             else:
                                 RNS.log("Skipping disabled interface \""+name+"\"", RNS.LOG_DEBUG)
 

RNS/Utilities/rnodeconf.py

@@ -169,6 +169,10 @@ class ROM():
     MODEL_E3       = 0xE3
     MODEL_E8       = 0xE8
 
+    PRODUCT_TDECK  = 0xD0
+    MODEL_D4       = 0xD4
+    MODEL_D9       = 0xD9
+
     PRODUCT_RAK4631 = 0x10
     MODEL_11       = 0x11
     MODEL_12       = 0x12
@@ -207,6 +211,7 @@ class ROM():
     BOARD_RNODE         = 0x31
     BOARD_HMBRW         = 0x32
     BOARD_TBEAM         = 0x33
+    BOARD_TDECK         = 0x3B
     BOARD_HUZZAH32      = 0x34
     BOARD_GENERIC_ESP32 = 0x35
     BOARD_LORA32_V2_0   = 0x36
@@ -221,6 +226,7 @@ products = {
     ROM.PRODUCT_RNODE:  "RNode",
     ROM.PRODUCT_HMBRW:  "Hombrew RNode",
     ROM.PRODUCT_TBEAM:  "LilyGO T-Beam",
+    ROM.PRODUCT_TDECK:  "LilyGO T-Deck",
     ROM.PRODUCT_T32_10: "LilyGO LoRa32 v1.0",
     ROM.PRODUCT_T32_20: "LilyGO LoRa32 v2.0",
     ROM.PRODUCT_T32_21: "LilyGO LoRa32 v2.1",
@@ -267,12 +273,14 @@ models = {
     0xCA: [863000000, 928000000, 21, "863 - 928 MHz", "rnode_firmware_heltec32v3.zip", "SX1262"],
     0xE4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_tbeam.zip", "SX1278"],
     0xE9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_tbeam.zip", "SX1276"],
+    0xD4: [420000000, 520000000, 22, "420 - 520 MHz", "rnode_firmware_tdeck.zip", "SX1268"],
+    0xD9: [850000000, 950000000, 22, "850 - 950 MHz", "rnode_firmware_tdeck.zip", "SX1262"],
     0xE3: [420000000, 520000000, 22, "420 - 520 MHz", "rnode_firmware_tbeam_sx1262.zip", "SX1268"],
     0xE8: [850000000, 950000000, 22, "850 - 950 MHz", "rnode_firmware_tbeam_sx1262.zip", "SX1262"],
     0x11: [430000000, 510000000, 22, "430 - 510 MHz", "rnode_firmware_rak4631.zip", "SX1262"],
     0x12: [779000000, 928000000, 22, "779 - 928 MHz", "rnode_firmware_rak4631.zip", "SX1262"],
-    0x11: [430000000, 510000000, 22, "430 - 510 MHz", "rnode_firmware_rak4631_sx1280.zip", "SX1262 + SX1280"],
-    0x12: [779000000, 928000000, 22, "779 - 928 MHz", "rnode_firmware_rak4631_sx1280.zip", "SX1262 + SX1280"],
+    0x13: [430000000, 510000000, 22, "430 - 510 MHz", "rnode_firmware_rak4631_sx1280.zip", "SX1262 + SX1280"],
+    0x14: [779000000, 928000000, 22, "779 - 928 MHz", "rnode_firmware_rak4631_sx1280.zip", "SX1262 + SX1280"],
     0x16: [779000000, 928000000, 22, "430 - 510 Mhz", "rnode_firmware_techo.zip", "SX1262"],
     0x17: [779000000, 928000000, 22, "779 - 928 Mhz", "rnode_firmware_techo.zip", "SX1262"],
     0x21: [820000000, 960000000, 22, "820 - 960 MHz", "rnode_firmware_opencom_xl.zip", "SX1262 + SX1280"],