Merge branch 'markqvist:master' into master

Update min and max values to support SX1280

Changelog.md

@@ -1,3 +1,49 @@
+### 2024-02-14: RNS β 0.7.1
+
+This release adds support for RNodes based on SX1262, SX1268 and SX1280 modems, and fixes a number of bugs. Thanks to @jacobeva, who contributed to this release!
+
+**Changes**
+- Added support for SX1262, SX1268 and SX1280 based RNodes
+- Updated `rnodeconf` to allow flashing T-Beam devices with SX126x chips
+- Fixed an invalid RSSI offset reference
+
+**Release Hashes**
+```
+8ecfbb42b6a699fd4ac5374ab5640e4bb164e80bb9ab4401ea82da132e497877 rns-0.7.1-py3-none-any.whl
+e0ab487305ba1aee2d16044640e7eb72d332bbf51aeb0b8bf984d037a64cb493 rnspure-0.7.1-py3-none-any.whl
+```
+
+### 2024-01-17: RNS β 0.7.0
+
+This maintenance release fixes a number of bugs. Thanks to @jooray and @jacobeva, who contributed to this release!
+
+**Changes**
+- Fixed large resource transfers failing under some conditions
+- Fixed a potential division by zero
+- Fixed a missing check on malformed advertisement packets
+- Fixed a formatting issue in `rnprobe`
+- Improved resource timeout calculations
+
+**Release Hashes**
+```
+0dc2abe5373b9afadfba7ec05bf7ddeff659c004aa339a94001ebed5b46f5b47 rns-0.7.0-py3-none-any.whl
+97f6e65a20b53bbdccd54b4d2bdaa36dc1712e144a55f40800c63fe7113819a5 rnspure-0.7.0-py3-none-any.whl
+```
+
+### 2023-12-07: RNS β 0.6.9
+
+This release adds a few convenience functions to the `rnid` utility, and improves roaming support on Android.
+
+**Changes**
+- Added identity import and export in hex, base32 and base64 formats to the `rnid` utility.
+- Added better carrier change detection for AutoInterface on Android.
+
+**Release Hashes**
+```
+258daf22cb6e72c6cd04fe94447daedf51dfd968eb2f3370eab9c71ad0898dd0 rns-0.6.9-py3-none-any.whl
+3644b64af5b4efd3969172bf0cf95ae1afba6c8ea99ce47d8e49e31a832bbaf8 rnspure-0.6.9-py3-none-any.whl
+```
+
 ### 2023-11-14: RNS β 0.6.8
 
 This maintenance release fixes a single bug.

Contributing.md

@@ -2,21 +2,29 @@
 
 Welcome, and thank you for your interest in contributing to Reticulum!
 
-Apart from writing code, there are many ways in which you can contribute. Before getting started, please read these guidelines.
+Apart from writing code, there are many ways in which you can contribute. Before interacting with this community, read these short and simple guidelines.
+
+## Expected Conduct
+
+First and foremost, there is one simple requirement for taking part in this community: While we primarily interact virtually, your actions matter and have real consequences. Therefore: **Act like a responsible, civilized person** - also in the face of disputes and heated disagreements. Speak your mind here, discussions are welcome. Just do so in the spirit of being face-to-face with everyone else. Thank you.
 
 ## Asking Questions
 
-If you want to ask a question, do not open an issue.
+If you want to ask a question, **do not open an issue**. The issue tracker is used by people *working on Reticulum* to track bugs, issues and improvements.
 
-Instead, ask away on the [discussions](https://github.com/markqvist/Reticulum/discussions) or on the [Reticulum Matrix channel](https://unsigned.io/contact.html#reticulum:matrix.org) at `#reticulum:matrix.org`
+Instead, ask away on the [discussions](https://github.com/markqvist/Reticulum/discussions) or on the [Reticulum Matrix channel](https://matrix.to/#/#reticulum:matrix.org) at `#reticulum:matrix.org`
 
-## Providing Feedback
+## Providing Feedback & Ideas
 
-Likewise, feedback, ideas and feature requests are a very welcome way to contribute, and should also be posted on the [discussions](https://github.com/markqvist/Reticulum/discussions), or on the [Reticulum Matrix channel](https://unsigned.io/contact.html#reticulum:matrix.org) at `#reticulum:matrix.org`
+Likewise, feedback, ideas and feature requests are a very welcome way to contribute, and should also be posted on the [discussions](https://github.com/markqvist/Reticulum/discussions), or on the [Reticulum Matrix channel](https://matrix.to/#/#reticulum:matrix.org) at `#reticulum:matrix.org`.
+
+Please do not post feature requests or general ideas on the issue tracker, or in direct messages to the primary developers. You are much more likely to get a response and start a constructive discussion by posting your ideas in the public channels created for these purposes.
 
 ## Reporting Issues
 
-If you have found a bug or issue in Reticulum, please report it on the [issue tracker](https://github.com/markqvist/Reticulum/issues).
+If you have found a bug or issue in this project, please report it using the [issue tracker](https://github.com/markqvist/Reticulum/issues). If at all possible, be sure to include details on how to reproduce the bug.
+
+Anything submitted to the issue tracker that does not follow these guidelines will be closed and removed without comments or explanation.
 
 ## Writing Code
 

FUNDING.yml

@@ -0,0 +1,2 @@
+ko_fi: markqvist
+custom: "https://unsigned.io/donate"

LICENSE

@@ -1,6 +1,6 @@
 MIT License, unless otherwise noted
 
-Copyright (c) 2016-2022 Mark Qvist / unsigned.io
+Copyright (c) 2016-2023 Mark Qvist / unsigned.io
 
 Permission is hereby granted, free of charge, to any person obtaining a copy
 of this software and associated documentation files (the "Software"), to deal

README.md

@@ -192,7 +192,7 @@ provide a dynamic performance envelope from 250 bits per second, to 1 gigabit
 per second on normal hardware.
 
 Currently, the usable performance envelope is approximately 150 bits per second
-to 20 megabits per second, with physical mediums faster than that not being
+to 40 megabits per second, with physical mediums faster than that not being
 saturated. Performance beyond the current level is intended for future
 upgrades, but not highly prioritised at this point in time.
 
@@ -273,16 +273,16 @@ The testnet also contains a number of [Nomad Network](https://github.com/markqvi
 You can help support the continued development of open, free and private communications systems by donating via one of the following channels:
 
 - Monero:
- ```
+  ```
   84FpY1QbxHcgdseePYNmhTHcrgMX4nFfBYtz2GKYToqHVVhJp8Eaw1Z1EedRnKD19b3B8NiLCGVxzKV17UMmmeEsCrPyA5w
   ```
 - Ethereum
   ```
-  0x81F7B979fEa6134bA9FD5c701b3501A2e61E897a
+  0xFDabC71AC4c0C78C95aDDDe3B4FA19d6273c5E73
   ```
 - Bitcoin
   ```
-  3CPmacGm34qYvR6XWLVEJmi2aNe3PZqUuq
+  35G9uWVzrpJJibzUwpNUQGQNFzLirhrYAH
   ```
 - Ko-Fi: https://ko-fi.com/markqvist
 

RNS/Interfaces/AutoInterface.py

@@ -334,6 +334,8 @@ class AutoInterface(Interface):
                                         thread.daemon = True
                                         thread.start()
 
+                                        self.carrier_changed = True
+
                 except Exception as e:
                     RNS.log("Could not get device information while updating link-local addresses for "+str(self)+". The contained exception was: "+str(e), RNS.LOG_ERROR)
 

RNS/Interfaces/Interface.py

@@ -68,6 +68,7 @@ class Interface:
         self.txb = 0
         self.created = time.time()
         self.online = False
+        self.bitrate = 1e6
 
         self.ingress_control = True
         self.ic_max_held_announces = Interface.MAX_HELD_ANNOUNCES

RNS/Interfaces/RNodeInterface.py

@@ -92,7 +92,7 @@ class RNodeInterface(Interface):
     MAX_CHUNK = 32768
 
     FREQ_MIN = 137000000
-    FREQ_MAX = 1020000000
+    FREQ_MAX = 3000000000
 
     RSSI_OFFSET = 157
 
@@ -109,7 +109,7 @@ class RNodeInterface(Interface):
 
     def __init__(self, owner, name, port, frequency = None, bandwidth = None, txpower = None, sf = None, cr = None, flow_control = False, id_interval = None, id_callsign = None, st_alock = None, lt_alock = None):
         if RNS.vendor.platformutils.is_android():
-            raise SystemError("Invlaid interface type. The Android-specific RNode interface must be used on Android")
+            raise SystemError("Invalid interface type. The Android-specific RNode interface must be used on Android")
 
         import importlib
         if importlib.util.find_spec('serial') != None:
@@ -190,15 +190,15 @@ class RNodeInterface(Interface):
             RNS.log("Invalid frequency configured for "+str(self), RNS.LOG_ERROR)
             self.validcfg = False
 
-        if (self.txpower < 0 or self.txpower > 17):
+        if (self.txpower < 0 or self.txpower > 22):
             RNS.log("Invalid TX power configured for "+str(self), RNS.LOG_ERROR)
             self.validcfg = False
 
-        if (self.bandwidth < 7800 or self.bandwidth > 500000):
+        if (self.bandwidth < 7800 or self.bandwidth > 1625000):
             RNS.log("Invalid bandwidth configured for "+str(self), RNS.LOG_ERROR)
             self.validcfg = False
 
-        if (self.sf < 7 or self.sf > 12):
+        if (self.sf < 5 or self.sf > 12):
             RNS.log("Invalid spreading factor configured for "+str(self), RNS.LOG_ERROR)
             self.validcfg = False
 

RNS/Link.py

@@ -352,7 +352,7 @@ class Link:
         packed_request    = umsgpack.packb(unpacked_request)
 
         if timeout == None:
-            timeout = self.rtt * self.traffic_timeout_factor + RNS.Resource.RESPONSE_MAX_GRACE_TIME/4.0
+            timeout = self.rtt * self.traffic_timeout_factor + RNS.Resource.RESPONSE_MAX_GRACE_TIME*1.125
 
         if len(packed_request) <= Link.MDU:
             request_packet   = RNS.Packet(self, packed_request, RNS.Packet.DATA, context = RNS.Packet.REQUEST)
@@ -687,7 +687,9 @@ class Link:
                     remove = pending_request
                     try:
                         pending_request.response_size = response_size
-                        pending_request.response_transfer_size = response_transfer_size
+                        if pending_request.response_transfer_size == None:
+                            pending_request.response_transfer_size = 0
+                        pending_request.response_transfer_size += response_transfer_size
                         pending_request.response_received(response_data)
                     except Exception as e:
                         RNS.log("Error occurred while handling response. The contained exception was: "+str(e), RNS.LOG_ERROR)
@@ -835,10 +837,15 @@ class Link:
                                 for pending_request in self.pending_requests:
                                     if pending_request.request_id == request_id:
                                         response_resource = RNS.Resource.accept(packet, callback=self.response_resource_concluded, progress_callback=pending_request.response_resource_progress, request_id = request_id)
-                                        pending_request.response_size = RNS.ResourceAdvertisement.read_size(packet)
-                                        pending_request.response_transfer_size = RNS.ResourceAdvertisement.read_transfer_size(packet)
-                                        pending_request.started_at = time.time()
-                                        pending_request.response_resource_progress(response_resource)
+                                        if response_resource != None:
+                                            if pending_request.response_size == None:
+                                                pending_request.response_size = RNS.ResourceAdvertisement.read_size(packet)
+                                            if pending_request.response_transfer_size == None:
+                                                pending_request.response_transfer_size = 0
+                                            pending_request.response_transfer_size += RNS.ResourceAdvertisement.read_transfer_size(packet)
+                                            if pending_request.started_at == None:
+                                                pending_request.started_at = time.time()
+                                            pending_request.response_resource_progress(response_resource)
 
                             elif self.resource_strategy == Link.ACCEPT_NONE:
                                 pass
@@ -1132,7 +1139,8 @@ class RequestReceipt():
     def request_resource_concluded(self, resource):
         if resource.status == RNS.Resource.COMPLETE:
             RNS.log("Request "+RNS.prettyhexrep(self.request_id)+" successfully sent as resource.", RNS.LOG_DEBUG)
-            self.started_at = time.time()
+            if self.started_at == None:
+                self.started_at = time.time()
             self.status = RequestReceipt.DELIVERED
             self.__resource_response_timeout = time.time()+self.timeout
             response_timeout_thread = threading.Thread(target=self.__response_timeout_job)
@@ -1173,25 +1181,26 @@ class RequestReceipt():
 
 
     def response_resource_progress(self, resource):
-        if not self.status == RequestReceipt.FAILED:
-            self.status = RequestReceipt.RECEIVING
-            if self.packet_receipt != None:
-                if self.packet_receipt.status != RNS.PacketReceipt.DELIVERED:
-                    self.packet_receipt.status = RNS.PacketReceipt.DELIVERED
-                    self.packet_receipt.proved = True
-                    self.packet_receipt.concluded_at = time.time()
-                    if self.packet_receipt.callbacks.delivery != None:
-                        self.packet_receipt.callbacks.delivery(self.packet_receipt)
+        if resource != None:
+            if not self.status == RequestReceipt.FAILED:
+                self.status = RequestReceipt.RECEIVING
+                if self.packet_receipt != None:
+                    if self.packet_receipt.status != RNS.PacketReceipt.DELIVERED:
+                        self.packet_receipt.status = RNS.PacketReceipt.DELIVERED
+                        self.packet_receipt.proved = True
+                        self.packet_receipt.concluded_at = time.time()
+                        if self.packet_receipt.callbacks.delivery != None:
+                            self.packet_receipt.callbacks.delivery(self.packet_receipt)
 
-            self.progress = resource.get_progress()
-            
-            if self.callbacks.progress != None:
-                try:
-                    self.callbacks.progress(self)
-                except Exception as e:
-                    RNS.log("Error while executing response progress callback from "+str(self)+". The contained exception was: "+str(e), RNS.LOG_ERROR)
-        else:
-            resource.cancel()
+                self.progress = resource.get_progress()
+                
+                if self.callbacks.progress != None:
+                    try:
+                        self.callbacks.progress(self)
+                    except Exception as e:
+                        RNS.log("Error while executing response progress callback from "+str(self)+". The contained exception was: "+str(e), RNS.LOG_ERROR)
+            else:
+                resource.cancel()
 
     
     def response_received(self, response):

RNS/Resource.py

@@ -25,6 +25,7 @@ import os
 import bz2
 import math
 import time
+import tempfile
 import threading
 from threading import Lock
 from .vendor import umsgpack as umsgpack
@@ -106,7 +107,8 @@ class Resource:
     PART_TIMEOUT_FACTOR_AFTER_RTT = 2
     MAX_RETRIES                   = 16
     MAX_ADV_RETRIES               = 4
-    SENDER_GRACE_TIME             = 10
+    SENDER_GRACE_TIME             = 10.0
+    PROCESSING_GRACE              = 1.0
     RETRY_GRACE_TIME              = 0.25
     PER_RETRY_DELAY               = 0.5
 
@@ -203,9 +205,19 @@ class Resource:
         resource_data = None
         self.assembly_lock = False
 
+        if data != None:
+            if not hasattr(data, "read") and len(data) > Resource.MAX_EFFICIENT_SIZE:
+                original_data = data
+                data_size = len(original_data)
+                data = tempfile.TemporaryFile()
+                data.write(original_data)
+                del original_data
+
         if hasattr(data, "read"):
-            data_size = os.stat(data.name).st_size
-            self.total_size  = data_size
+            if data_size == None:
+                data_size = os.stat(data.name).st_size
+
+            self.total_size = data_size
             self.grand_total_parts = math.ceil(data_size/Resource.SDU)
 
             if data_size <= Resource.MAX_EFFICIENT_SIZE:
@@ -278,7 +290,7 @@ class Resource:
             self.uncompressed_data = data
 
             compression_began = time.time()
-            if (auto_compress and len(self.uncompressed_data) < Resource.AUTO_COMPRESS_MAX_SIZE):
+            if (auto_compress and len(self.uncompressed_data) <= Resource.AUTO_COMPRESS_MAX_SIZE):
                 RNS.log("Compressing resource data...", RNS.LOG_DEBUG)
                 self.compressed_data   = bz2.compress(self.uncompressed_data)
                 RNS.log("Compression completed in "+str(round(time.time()-compression_began, 3))+" seconds", RNS.LOG_DEBUG)
@@ -440,7 +452,7 @@ class Resource:
             sleep_time = None
 
             if self.status == Resource.ADVERTISED:
-                sleep_time = (self.adv_sent+self.timeout)-time.time()
+                sleep_time = (self.adv_sent+self.timeout+Resource.PROCESSING_GRACE)-time.time()
                 if sleep_time < 0:
                     if self.retries_left <= 0:
                         RNS.log("Resource transfer timeout after sending advertisement", RNS.LOG_DEBUG)
@@ -456,7 +468,7 @@ class Resource:
                             self.adv_sent = self.last_activity
                             sleep_time = 0.001
                         except Exception as e:
-                            RNS.log("Could not resend advertisement packet, cancelling resource", RNS.LOG_VERBOSE)
+                            RNS.log("Could not resend advertisement packet, cancelling resource. The contained exception was: "+str(e), RNS.LOG_VERBOSE)
                             self.cancel()
                     
 
@@ -612,10 +624,26 @@ class Resource:
                                 self.callback(self)
                             except Exception as e:
                                 RNS.log("Error while executing resource concluded callback from "+str(self)+". The contained exception was: "+str(e), RNS.LOG_ERROR)
+                            finally:
+                                try:
+                                    if hasattr(self, "input_file"):
+                                        if hasattr(self.input_file, "close") and callable(self.input_file.close):
+                                            self.input_file.close()
+
+                                except Exception as e:
+                                    RNS.log("Error while closing resource input file: "+str(e), RNS.LOG_ERROR)
                     else:
                         # Otherwise we'll recursively create the
                         # next segment of the resource
-                        Resource(self.input_file, self.link, callback = self.callback, segment_index = self.segment_index+1, original_hash=self.original_hash, progress_callback = self.__progress_callback)
+                        Resource(
+                            self.input_file, self.link,
+                            callback = self.callback,
+                            segment_index = self.segment_index+1,
+                            original_hash=self.original_hash,
+                            progress_callback = self.__progress_callback,
+                            request_id = self.request_id,
+                            is_response = self.is_response,
+                        )
                 else:
                     pass
             else:
@@ -731,20 +759,6 @@ class Resource:
                 i = 0; pn = self.consecutive_completed_height+1
                 search_start = pn
                 search_size = self.window
-
-                # TODO: Remove
-                # tpm = []
-                # tpi = 0
-                # try:
-                #     for p in self.parts:
-                #         if p == None:
-                #             tpm.append(None)
-                #         else:
-                #             tpm.append(tpi)
-                #         tpi+=1
-                # except Exception as e:
-                #     print(str(e))
-                # RNS.log(f"Partmap: "+str(tpm))
                 
                 for part in self.parts[search_start:search_start+search_size]:
                     if part == None:

RNS/Transport.py

@@ -876,7 +876,7 @@ class Transport:
                                             interface.announce_queue = []
 
                                     queued_announces = True if len(interface.announce_queue) > 0 else False
-                                    if not queued_announces and outbound_time > interface.announce_allowed_at:
+                                    if not queued_announces and outbound_time > interface.announce_allowed_at and interface.bitrate != None and interface.bitrate != 0:
                                         tx_time   = (len(packet.raw)*8) / interface.bitrate
                                         wait_time = (tx_time / interface.announce_cap)
                                         interface.announce_allowed_at = outbound_time + wait_time

RNS/Utilities/rnodeconf.py

@@ -42,8 +42,8 @@ RNS.logtimefmt      = "%H:%M:%S"
 RNS.compact_log_fmt = True
 
 program_version = "2.1.3"
-eth_addr = "0x81F7B979fEa6134bA9FD5c701b3501A2e61E897a"
-btc_addr = "3CPmacGm34qYvR6XWLVEJmi2aNe3PZqUuq"
+eth_addr = "0xFDabC71AC4c0C78C95aDDDe3B4FA19d6273c5E73"
+btc_addr = "35G9uWVzrpJJibzUwpNUQGQNFzLirhrYAH"
 xmr_addr = "87HcDx6jRSkMQ9nPRd5K9hGGpZLn2s7vWETjMaVM5KfV4TD36NcYa8J8WSxhTSvBzzFpqDwp2fg5GX2moZ7VAP9QMZCZGET"
 
 rnode = None
@@ -120,12 +120,16 @@ class KISS():
 class ROM():
     PLATFORM_AVR   = 0x90
     PLATFORM_ESP32 = 0x80
+    PLATFORM_NRF52 = 0x70
 
     MCU_1284P      = 0x91
     MCU_2560       = 0x92
     MCU_ESP32      = 0x81
+    MCU_NRF52      = 0x71
 
     PRODUCT_RNODE  = 0x03
+    MODEL_A1       = 0xA1
+    MODEL_A6       = 0xA6
     MODEL_A4       = 0xA4
     MODEL_A9       = 0xA9
     MODEL_A3       = 0xA3
@@ -144,6 +148,8 @@ class ROM():
     PRODUCT_T32_21 = 0xB1
     MODEL_B4       = 0xB4
     MODEL_B9       = 0xB9
+    MODEL_B4_TCXO  = 0x04
+    MODEL_B9_TCXO  = 0x09
 
     PRODUCT_H32_V2 = 0xC0
     MODEL_C4       = 0xC4
@@ -152,6 +158,8 @@ class ROM():
     PRODUCT_TBEAM  = 0xE0
     MODEL_E4       = 0xE4
     MODEL_E9       = 0xE9
+    MODEL_E3       = 0xE3
+    MODEL_E8       = 0xE8
     
     PRODUCT_HMBRW  = 0xF0
     MODEL_FF       = 0xFF
@@ -182,6 +190,7 @@ class ROM():
     BOARD_GENERIC_ESP32 = 0x35
     BOARD_LORA32_V2_0   = 0x36
     BOARD_LORA32_V2_1   = 0x37
+    BOARD_RAK4630       = 0x51
 
 mapped_product = ROM.PRODUCT_RNODE
 products = {
@@ -197,33 +206,41 @@ products = {
 platforms = {
     ROM.PLATFORM_AVR: "AVR",
     ROM.PLATFORM_ESP32:"ESP32",
+    ROM.PLATFORM_NRF52:"NRF52",
 }
 
 mcus = {
     ROM.MCU_1284P: "ATmega1284P",
     ROM.MCU_2560:"ATmega2560",
     ROM.MCU_ESP32:"Espressif Systems ESP32",
+    ROM.MCU_NRF52:"Nordic nRF52840",
 }
 
 models = {
-    0xA4: [410000000, 525000000, 14, "410 - 525 MHz", "rnode_firmware.hex"],
-    0xA9: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware.hex"],
-    0xA2: [410000000, 525000000, 17, "410 - 525 MHz", "rnode_firmware_ng21.zip"],
-    0xA7: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware_ng21.zip"],
-    0xA3: [410000000, 525000000, 17, "410 - 525 MHz", "rnode_firmware_ng20.zip"],
-    0xA8: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware_ng20.zip"],
-    0xB3: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v20.zip"],
-    0xB8: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v20.zip"],
-    0xB4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v21.zip"],
-    0xB9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v21.zip"],
-    0xBA: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v10.zip"],
-    0xBB: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v10.zip"],
-    0xC4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_heltec32v2.zip"],
-    0xC9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_heltec32v2.zip"],
-    0xE4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_tbeam.zip"],
-    0xE9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_tbeam.zip"],
-    0xFE: [100000000, 1100000000, 17, "(Band capabilities unknown)", None],
-    0xFF: [100000000, 1100000000, 14, "(Band capabilities unknown)", None],
+    0xA4: [410000000, 525000000, 14, "410 - 525 MHz", "rnode_firmware.hex", "SX1278"],
+    0xA9: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware.hex", "SX1276"],
+    0xA1: [410000000, 525000000, 22, "410 - 525 MHz", "rnode_firmware_t3s3.zip", "SX1268"],
+    0xA6: [820000000, 1020000000, 22, "820 - 960 MHz", "rnode_firmware_t3s3.zip", "SX1262"],
+    0xA2: [410000000, 525000000, 17, "410 - 525 MHz", "rnode_firmware_ng21.zip", "SX1278"],
+    0xA7: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware_ng21.zip", "SX1276"],
+    0xA3: [410000000, 525000000, 17, "410 - 525 MHz", "rnode_firmware_ng20.zip", "SX1278"],
+    0xA8: [820000000, 1020000000, 17, "820 - 1020 MHz", "rnode_firmware_ng20.zip", "SX1276"],
+    0xB3: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v20.zip", "SX1278"],
+    0xB8: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v20.zip", "SX1276"],
+    0xB4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v21.zip", "SX1278"],
+    0xB9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v21.zip", "SX1276"],
+    0x04: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v21_tcxo.zip", "SX1278"],
+    0x09: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v21_tcxo.zip", "SX1276"],
+    0xBA: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_lora32v10.zip", "SX1278"],
+    0xBB: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_lora32v10.zip", "SX1276"],
+    0xC4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_heltec32v2.zip", "SX1278"],
+    0xC9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_heltec32v2.zip", "SX1276"],
+    0xE4: [420000000, 520000000, 17, "420 - 520 MHz", "rnode_firmware_tbeam.zip", "SX1278"],
+    0xE9: [850000000, 950000000, 17, "850 - 950 MHz", "rnode_firmware_tbeam.zip", "SX1276"],
+    0xE3: [420000000, 520000000, 22, "420 - 520 MHz", "rnode_firmware_tbeam_sx1262.zip", "SX1268"],
+    0xE8: [850000000, 950000000, 22, "850 - 950 MHz", "rnode_firmware_tbeam_sx1262.zip", "SX1262"],
+    0xFE: [100000000, 1100000000, 17, "(Band capabilities unknown)", None, "Unknown"],
+    0xFF: [100000000, 1100000000, 14, "(Band capabilities unknown)", None, "Unknown"],
 }
 
 CNF_DIR = None
@@ -516,7 +533,7 @@ class RNode():
                                 if (len(command_buffer) == 4):
                                     self.r_stat_tx = ord(command_buffer[0]) << 24 | ord(command_buffer[1]) << 16 | ord(command_buffer[2]) << 8 | ord(command_buffer[3])
                         elif (command == KISS.CMD_STAT_RSSI):
-                            self.r_stat_rssi = byte-RNodeInterface.RSSI_OFFSET
+                            self.r_stat_rssi = byte-157 # RSSI Offset
                         elif (command == KISS.CMD_STAT_SNR):
                             self.r_stat_snr = int.from_bytes(bytes([byte]), byteorder="big", signed=True) * 0.25
                         elif (command == KISS.CMD_RANDOM):
@@ -928,6 +945,7 @@ class RNode():
         except Exception as e:
             self.provisioned = False
             RNS.log("Invalid EEPROM data, could not parse device EEPROM.")
+            RNS.log("The contained exception was: "+str(e))
 
 
     def device_probe(self):
@@ -1018,6 +1036,10 @@ def ensure_firmware_file(fw_filename):
                     file = open(UPD_DIR+"/"+fw_filename+".version.latest", "rb")
                     release_info = file.read().decode("utf-8").strip()
                     selected_version = release_info.split()[0]
+                    if selected_version == "not":
+                        RNS.log("No valid version found for this board, exiting.")
+                        exit(199)
+
                     selected_hash = release_info.split()[1]
                     if not os.path.isdir(UPD_DIR+"/"+selected_version):
                         os.makedirs(UPD_DIR+"/"+selected_version)
@@ -1198,15 +1220,15 @@ def main():
 
         parser.add_argument("--version", action="store_true", help="Print program version and exit")
 
-        parser.add_argument("-f", "--flash", action="store_true", help=argparse.SUPPRESS) # Flash firmware and bootstrap EEPROM
-        parser.add_argument("-r", "--rom", action="store_true", help=argparse.SUPPRESS) # Bootstrap EEPROM without flashing firmware
-        parser.add_argument("-k", "--key", action="store_true", help=argparse.SUPPRESS) # Generate a new signing key and exit
-        parser.add_argument("-S", "--sign", action="store_true", help=argparse.SUPPRESS) # Display public part of signing key
-        parser.add_argument("-H", "--firmware-hash", action="store", help=argparse.SUPPRESS) # Display public part of signing key
-        parser.add_argument("--platform", action="store", metavar="platform", type=str, default=None, help=argparse.SUPPRESS) # Platform specification for device bootstrap
-        parser.add_argument("--product", action="store", metavar="product", type=str, default=None, help=argparse.SUPPRESS) # Product specification for device bootstrap
-        parser.add_argument("--model", action="store", metavar="model", type=str, default=None, help=argparse.SUPPRESS) # Model code for device bootstrap
-        parser.add_argument("--hwrev", action="store", metavar="revision", type=int, default=None, help=argparse.SUPPRESS) # Hardware revision for device bootstrap
+        parser.add_argument("-f", "--flash", action="store_true", help="Flash firmware and bootstrap EEPROM")
+        parser.add_argument("-r", "--rom", action="store_true", help="Bootstrap EEPROM without flashing firmware")
+        parser.add_argument("-k", "--key", action="store_true", help="Generate a new signing key and exit") # 
+        parser.add_argument("-S", "--sign", action="store_true", help="Display public part of signing key")
+        parser.add_argument("-H", "--firmware-hash", action="store", help="Display installed firmware hash")
+        parser.add_argument("--platform", action="store", metavar="platform", type=str, default=None, help="Platform specification for device bootstrap")
+        parser.add_argument("--product", action="store", metavar="product", type=str, default=None, help="Product specification for device bootstrap") # 
+        parser.add_argument("--model", action="store", metavar="model", type=str, default=None, help="Model code for device bootstrap")
+        parser.add_argument("--hwrev", action="store", metavar="revision", type=int, default=None, help="Hardware revision for device bootstrap")
 
         parser.add_argument("port", nargs="?", default=None, help="serial port where RNode is attached", type=str)
         args = parser.parse_args()
@@ -1526,6 +1548,7 @@ def main():
             print("[5] LilyGO LoRa32 v1.0")
             print("[6] LilyGO T-Beam")
             print("[7] Heltec LoRa32 v2")
+            print("[8] LilyGO LoRa T3S3")
             print("       .")
             print("      / \\   Select one of these options if you want to easily turn")
             print("       |    a supported development board into an RNode.")
@@ -1536,7 +1559,8 @@ def main():
             selected_product = None
             try:
                 c_dev = int(input())
-                if c_dev < 1 or c_dev > 7:
+                c_mod = False
+                if c_dev < 1 or c_dev > 8:
                     raise ValueError()
                 elif c_dev == 1:
                     selected_product = ROM.PRODUCT_RNODE
@@ -1565,8 +1589,7 @@ def main():
                     print("                          T-Beam RNode Installer")
                     print("")
                     print("The RNode firmware can currently be installed on T-Beam devices using the")
-                    print("SX1276 and SX1278 transceiver chips. Support for devices with the newer")
-                    print("SX1262 and SX1268 chips is in development.")
+                    print("SX1276, SX1278, SX1262 and SX1268 transceiver chips.")
                     print("")
                     print("Important! Using RNode firmware on T-Beam devices should currently be")
                     print("considered experimental. It is not intended for production or critical use.")
@@ -1637,6 +1660,23 @@ def main():
                     print("who would like to experiment with it. Hit enter to continue.")
                     print("---------------------------------------------------------------------------")
                     input()
+                elif c_dev == 8:
+                    selected_product = ROM.PRODUCT_RNODE
+                    c_mod = True
+                    clear()
+                    print("")
+                    print("---------------------------------------------------------------------------")
+                    print("                     LilyGO LoRa32 T3S3 RNode Installer")
+                    print("")
+                    print("Important! Using RNode firmware on T3S3 devices should currently be")
+                    print("considered experimental. It is not intended for production or critical use.")
+                    print("")
+                    print("Please note that Bluetooth is currently not implemented on this board.")
+                    print("")
+                    print("The currently supplied firmware is provided AS-IS as a courtesey to those")
+                    print("who would like to experiment with it. Hit enter to continue.")
+                    print("---------------------------------------------------------------------------")
+                    input()
             except Exception as e:
                 print("That device type does not exist, exiting now.")
                 exit()
@@ -1689,53 +1729,86 @@ def main():
 
 
             elif selected_product == ROM.PRODUCT_RNODE:
-                selected_mcu = ROM.MCU_1284P
-                print("\nWhat model is this RNode?\n")
-                print("[1] Handheld v2.x RNode, 410 - 525 MHz")
-                print("[2] Handheld v2.x RNode, 820 - 1020 MHz")
-                print("")
-                print("[3] Original v1.x RNode, 410 - 525 MHz")
-                print("[4] Original v1.x RNode, 820 - 1020 MHz")
-                # print("[5] Prototype v2 RNode, 410 - 525 MHz")
-                # print("[6] Prototype v2 RNode, 820 - 1020 MHz")
-                print("\n? ", end="")
-                try:
-                    c_model = int(input())
-                    if c_model < 1 or c_model > 6:
-                        raise ValueError()
-                    elif c_model == 3:
-                        selected_model = ROM.MODEL_A4
-                        selected_platform = ROM.PLATFORM_AVR
-                    elif c_model == 4:
-                        selected_model = ROM.MODEL_A9
-                        selected_platform = ROM.PLATFORM_AVR
-                    elif c_model == 1:
-                        selected_model = ROM.MODEL_A2
-                        selected_mcu = ROM.MCU_ESP32
-                        selected_platform = ROM.PLATFORM_ESP32
-                    elif c_model == 2:
-                        selected_model = ROM.MODEL_A7
-                        selected_mcu = ROM.MCU_ESP32
-                        selected_platform = ROM.PLATFORM_ESP32
-                    # elif c_model == 5:
-                    #     selected_model = ROM.MODEL_A3
-                    #     selected_mcu = ROM.MCU_ESP32
-                    #     selected_platform = ROM.PLATFORM_ESP32
-                    # elif c_model == 6:
-                    #     selected_model = ROM.MODEL_A8
-                    #     selected_mcu = ROM.MCU_ESP32
-                    #     selected_platform = ROM.PLATFORM_ESP32
-                except Exception as e:
-                    print("That model does not exist, exiting now.")
-                    exit()
+                if not c_mod:
+                    selected_mcu = ROM.MCU_1284P
+                    print("\nWhat model is this RNode?\n")
+                    print("[1] Handheld v2.1 RNode, 410 - 525 MHz")
+                    print("[2] Handheld v2.1 RNode, 820 - 1020 MHz")
+                    print("")
+                    print("[3] Original v1.x RNode, 410 - 525 MHz")
+                    print("[4] Original v1.x RNode, 820 - 1020 MHz")
+                    print("")
+                    print("[5] Prototype v2.2 RNode, 410 - 525 MHz")
+                    print("[6] Prototype v2.2 RNode, 820 - 1020 MHz")
+                    # print("[5] Prototype v2 RNode, 410 - 525 MHz")
+                    # print("[6] Prototype v2 RNode, 820 - 1020 MHz")
+                    print("\n? ", end="")
+                    try:
+                        c_model = int(input())
+                        if c_model < 1 or c_model > 6:
+                            raise ValueError()
+                        elif c_model == 1:
+                            selected_model = ROM.MODEL_A2
+                            selected_mcu = ROM.MCU_ESP32
+                            selected_platform = ROM.PLATFORM_ESP32
+                        elif c_model == 2:
+                            selected_model = ROM.MODEL_A7
+                            selected_mcu = ROM.MCU_ESP32
+                            selected_platform = ROM.PLATFORM_ESP32
+                        elif c_model == 3:
+                            selected_model = ROM.MODEL_A4
+                            selected_platform = ROM.PLATFORM_AVR
+                        elif c_model == 4:
+                            selected_model = ROM.MODEL_A9
+                            selected_platform = ROM.PLATFORM_AVR
+                        elif c_model == 5:
+                            selected_model = ROM.MODEL_A1
+                            selected_mcu = ROM.MCU_ESP32
+                            selected_platform = ROM.PLATFORM_ESP32
+                        elif c_model == 6:
+                            selected_model = ROM.MODEL_A6
+                            selected_mcu = ROM.MCU_ESP32
+                            selected_platform = ROM.PLATFORM_ESP32
+                        # elif c_model == 5:
+                        #     selected_model = ROM.MODEL_A3
+                        #     selected_mcu = ROM.MCU_ESP32
+                        #     selected_platform = ROM.PLATFORM_ESP32
+                        # elif c_model == 6:
+                        #     selected_model = ROM.MODEL_A8
+                        #     selected_mcu = ROM.MCU_ESP32
+                        #     selected_platform = ROM.PLATFORM_ESP32
+                    except Exception as e:
+                        print("That model does not exist, exiting now.")
+                        exit()
+                else:
+                    print("\nWhat model is this T3S3?\n")
+                    print("[1] 410 - 525 MHz (with SX1268 chip)")
+                    print("[2] 820 - 1020 MHz (with SX1268 chip)")
+                    print("\n? ", end="")
+                    try:
+                        c_model = int(input())
+                        if c_model < 1 or c_model > 2:
+                            raise ValueError()
+                        elif c_model == 1:
+                            selected_model = ROM.MODEL_A1
+                            selected_mcu = ROM.MCU_ESP32
+                            selected_platform = ROM.PLATFORM_ESP32
+                        elif c_model == 2:
+                            selected_model = ROM.MODEL_A6
+                            selected_mcu = ROM.MCU_ESP32
+                            selected_platform = ROM.PLATFORM_ESP32
+                    except Exception as e:
+                        print("That model does not exist, exiting now.")
+                        exit()
 
             elif selected_product == ROM.PRODUCT_TBEAM:
                 selected_mcu = ROM.MCU_ESP32
                 print("\nWhat band is this T-Beam for?\n")
-                print("[1] 433 MHz")
-                print("[2] 868 MHz")
-                print("[3] 915 MHz")
-                print("[4] 923 MHz")
+                print("[1] 433 MHz         (with SX1278 chip)")
+                print("[2] 868/915/923 MHz (with SX1276 chip)")
+                print("");
+                print("[3] 433 MHz         (with SX1268 chip)")
+                print("[4] 868/915/923 MHz (with SX1262 chip)")
                 print("\n? ", end="")
                 try:
                     c_model = int(input())
@@ -1744,9 +1817,15 @@ def main():
                     elif c_model == 1:
                         selected_model = ROM.MODEL_E4
                         selected_platform = ROM.PLATFORM_ESP32
-                    elif c_model > 1:
+                    elif c_model == 2:
                         selected_model = ROM.MODEL_E9
                         selected_platform = ROM.PLATFORM_ESP32
+                    elif c_model == 3:
+                        selected_model = ROM.MODEL_E3
+                        selected_platform = ROM.PLATFORM_ESP32
+                    elif c_model == 4:
+                        selected_model = ROM.MODEL_E8
+                        selected_platform = ROM.PLATFORM_ESP32
                 except Exception as e:
                     print("That band does not exist, exiting now.")
                     exit()
@@ -1799,9 +1878,9 @@ def main():
                 selected_mcu = ROM.MCU_ESP32
                 print("\nWhat band is this LoRa32 for?\n")
                 print("[1] 433 MHz")
-                print("[2] 868 MHz")
-                print("[3] 915 MHz")
-                print("[4] 923 MHz")
+                print("[2] 868/915/923 MHz")
+                print("[3] 433 MHz, with TCXO")
+                print("[4] 868/915/923 MHz, with TCXO")
                 print("\n? ", end="")
                 try:
                     c_model = int(input())
@@ -1810,9 +1889,15 @@ def main():
                     elif c_model == 1:
                         selected_model = ROM.MODEL_B4
                         selected_platform = ROM.PLATFORM_ESP32
-                    elif c_model > 1:
+                    elif c_model == 2:
                         selected_model = ROM.MODEL_B9
                         selected_platform = ROM.PLATFORM_ESP32
+                    elif c_model == 3:
+                        selected_model = ROM.MODEL_B4_TCXO
+                        selected_platform = ROM.PLATFORM_ESP32
+                    elif c_model == 4:
+                        selected_model = ROM.MODEL_B9_TCXO
+                        selected_platform = ROM.PLATFORM_ESP32
                 except Exception as e:
                     print("That band does not exist, exiting now.")
                     exit()
@@ -2127,6 +2212,42 @@ def main():
                                 "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam.bin",
                                 "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam.partitions",
                             ]
+                    elif fw_filename == "rnode_firmware_tbeam_sx1262.zip":
+                        if numeric_version >= 1.55:
+                            return [
+                                sys.executable, flasher,
+                                "--chip", "esp32",
+                                "--port", args.port,
+                                "--baud", args.baud_flash,
+                                "--before", "default_reset",
+                                "--after", "hard_reset",
+                                "write_flash", "-z",
+                                "--flash_mode", "dio",
+                                "--flash_freq", "80m",
+                                "--flash_size", "4MB",
+                                "0xe000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam_sx1262.boot_app0",
+                                "0x1000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam_sx1262.bootloader",
+                                "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam_sx1262.bin",
+                                "0x210000",UPD_DIR+"/"+selected_version+"/console_image.bin",
+                                "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam_sx1262.partitions",
+                            ]
+                        else:
+                            return [
+                                sys.executable, flasher,
+                                "--chip", "esp32",
+                                "--port", args.port,
+                                "--baud", args.baud_flash,
+                                "--before", "default_reset",
+                                "--after", "hard_reset",
+                                "write_flash", "-z",
+                                "--flash_mode", "dio",
+                                "--flash_freq", "80m",
+                                "--flash_size", "4MB",
+                                "0xe000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam.boot_app0",
+                                "0x1000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam.bootloader",
+                                "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam.bin",
+                                "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_tbeam.partitions",
+                            ]
                     elif fw_filename == "rnode_firmware_lora32v10.zip":
                         if numeric_version >= 1.59:
                             return [
@@ -2235,6 +2356,24 @@ def main():
                                 "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_lora32v21.bin",
                                 "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_lora32v21.partitions",
                             ]
+                    elif fw_filename == "rnode_firmware_lora32v21_tcxo.zip":
+                        return [
+                            sys.executable, flasher,
+                            "--chip", "esp32",
+                            "--port", args.port,
+                            "--baud", args.baud_flash,
+                            "--before", "default_reset",
+                            "--after", "hard_reset",
+                            "write_flash", "-z",
+                            "--flash_mode", "dio",
+                            "--flash_freq", "80m",
+                            "--flash_size", "4MB",
+                            "0xe000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_lora32v21_tcxo.boot_app0",
+                            "0x1000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_lora32v21_tcxo.bootloader",
+                            "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_lora32v21_tcxo.bin",
+                            "0x210000",UPD_DIR+"/"+selected_version+"/console_image.bin",
+                            "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_lora32v21_tcxo.partitions",
+                        ]
                     elif fw_filename == "rnode_firmware_heltec32v2.zip":
                         if numeric_version >= 1.55:
                             return [
@@ -2415,6 +2554,24 @@ def main():
                                 "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_ng21.bin",
                                 "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_ng21.partitions",
                             ]
+                    elif fw_filename == "rnode_firmware_t3s3.zip":
+                        return [
+                            sys.executable, flasher,
+                            "--chip", "esp32s3",
+                            "--port", args.port,
+                            "--baud", args.baud_flash,
+                            "--before", "default_reset",
+                            "--after", "hard_reset",
+                            "write_flash", "-z",
+                            "--flash_mode", "dio",
+                            "--flash_freq", "80m",
+                            "--flash_size", "4MB",
+                            "0xe000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_t3s3.boot_app0",
+                            "0x1000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_t3s3.bootloader",
+                            "0x10000", UPD_DIR+"/"+selected_version+"/rnode_firmware_t3s3.bin",
+                            "0x210000",UPD_DIR+"/"+selected_version+"/console_image.bin",
+                            "0x8000",  UPD_DIR+"/"+selected_version+"/rnode_firmware_t3s3.partitions",
+                        ]
                     elif fw_filename == "extracted_rnode_firmware.zip":
                         return [
                             sys.executable, flasher,
@@ -2799,6 +2956,7 @@ def main():
                     RNS.log("\tFirmware version   : "+rnode.version)
                     RNS.log("\tHardware revision  : "+str(int(rnode.hw_rev)))
                     RNS.log("\tSerial number      : "+RNS.hexrep(rnode.serialno))
+                    RNS.log("\tModem chip         : "+str(models[rnode.model][5]))
                     RNS.log("\tFrequency range    : "+str(rnode.min_freq/1e6)+" MHz - "+str(rnode.max_freq/1e6)+" MHz")
                     RNS.log("\tMax TX power       : "+str(rnode.max_output)+" dBm")
                     RNS.log("\tManufactured       : "+timestring)
@@ -2880,12 +3038,21 @@ def main():
                             mapped_product = ROM.PRODUCT_TBEAM
 
                     if mapped_model != None:
-                        model = mapped_model
+                        if mapped_model == ROM.MODEL_B4_TCXO:
+                            model = ROM.MODEL_B4
+                        elif mapped_model == ROM.MODEL_B9_TCXO:
+                            model = ROM.MODEL_B9
+                        else:
+                            model = mapped_model
                     else:
                         if args.model == "a4":
                             model = ROM.MODEL_A4
                         elif args.model == "a9":
                             model = ROM.MODEL_A9
+                        elif args.model == "a1":
+                            model = ROM.MODEL_A1
+                        elif args.model == "a6":
+                            model = ROM.MODEL_A6
                         elif args.model == "e4":
                             model = ROM.MODEL_E4
                         elif args.model == "e9":

RNS/Utilities/rnprobe.py

@@ -132,7 +132,7 @@ def program_setup(configdir, destination_hexhash, size=None, full_name = None, v
             i = (i+1)%len(syms)
 
         if time.time() > _timeout:
-            print("\r                                                          \rProbe timed out")
+            print("\r                                                                \rProbe timed out")
         
         else:
             print("\b\b ")

RNS/__init__.py

@@ -144,6 +144,12 @@ def rand():
     result = instance_random.random()
     return result
 
+def trace_exception(e):
+    import traceback
+    exception_info = "".join(traceback.TracebackException.from_exception(e).format())
+    log(f"An unhandled {str(type(e))} exception occurred: {str(e)}", LOG_ERROR)
+    log(exception_info, LOG_ERROR)
+
 def hexrep(data, delimit=True):
     try:
         iter(data)

RNS/_version.py

@@ -1 +1 @@
-__version__ = "0.6.8"
+__version__ = "0.7.1"

docs/manual/.buildinfo

@@ -1,4 +1,4 @@
 # Sphinx build info version 1
 # This file hashes the configuration used when building these files. When it is not found, a full rebuild will be done.
-config: 01461792acfce5a3fb667a828829012a
+config: ea2e78e752b7110746ccd0d4052a8cac
 tags: 645f666f9bcd5a90fca523b33c5a78b7

docs/manual/_static/documentation_options.js

@@ -1,6 +1,6 @@
 var DOCUMENTATION_OPTIONS = {
     URL_ROOT: document.getElementById("documentation_options").getAttribute('data-url_root'),
-    VERSION: '0.6.8 beta',
+    VERSION: '0.7.1 beta',
     LANGUAGE: 'en',
     COLLAPSE_INDEX: false,
     BUILDER: 'html',

docs/manual/examples.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Support Reticulum" href="support.html" /><link rel="prev" title="Building Networks" href="networks.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>Code Examples - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>Code Examples - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -3321,7 +3321,7 @@ interface to efficiently pass files of any size over a Reticulum <a class="refer
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/forhumans.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>An Explanation of Reticulum for Human Beings - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>An Explanation of Reticulum for Human Beings - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -257,7 +257,7 @@
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/genindex.html

@@ -4,7 +4,7 @@
     <meta name="viewport" content="width=device-width,initial-scale=1"/>
     <meta name="color-scheme" content="light dark"><link rel="index" title="Index" href="#" /><link rel="search" title="Search" href="search.html" />
 
-    <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/><title>Index - Reticulum Network Stack 0.6.8 beta documentation</title>
+    <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/><title>Index - Reticulum Network Stack 0.7.1 beta documentation</title>
 <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -139,7 +139,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -165,7 +165,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -735,7 +735,7 @@
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/gettingstartedfast.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Using Reticulum on Your System" href="using.html" /><link rel="prev" title="What is Reticulum?" href="whatis.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>Getting Started Fast - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>Getting Started Fast - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -758,7 +758,7 @@ section of this manual.</p>
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/hardware.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Configuring Interfaces" href="interfaces.html" /><link rel="prev" title="Understanding Reticulum" href="understanding.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>Communications Hardware - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>Communications Hardware - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -519,7 +519,7 @@ can be used with Reticulum. This includes virtual software modems such as
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/index.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="What is Reticulum?" href="whatis.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="#"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="#"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -468,7 +468,7 @@ to participate in the development of Reticulum itself.</p>
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/interfaces.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Building Networks" href="networks.html" /><link rel="prev" title="Communications Hardware" href="hardware.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>Configuring Interfaces - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>Configuring Interfaces - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -1106,7 +1106,7 @@ to <code class="docutils literal notranslate"><span class="pre">30</span></code>
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/networks.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Code Examples" href="examples.html" /><link rel="prev" title="Configuring Interfaces" href="interfaces.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>Building Networks - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>Building Networks - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -467,7 +467,7 @@ connected outliers are now an integral part of the network.</p>
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/reference.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="prev" title="Support Reticulum" href="support.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>API Reference - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>API Reference - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -2078,7 +2078,7 @@ will announce it.</p>
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/search.html

@@ -4,7 +4,7 @@
     <meta name="viewport" content="width=device-width,initial-scale=1"/>
     <meta name="color-scheme" content="light dark"><link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="#" />
 
-    <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/><title>Search - Reticulum Network Stack 0.6.8 beta documentation</title><link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
+    <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/><title>Search - Reticulum Network Stack 0.7.1 beta documentation</title><link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo-extensions.css?digest=30d1aed668e5c3a91c3e3bf6a60b675221979f0e" />
@@ -138,7 +138,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -164,7 +164,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="#" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -262,7 +262,7 @@
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/support.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="API Reference" href="reference.html" /><link rel="prev" title="Code Examples" href="examples.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>Support Reticulum - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>Support Reticulum - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -330,7 +330,7 @@ report issues, suggest functionality and contribute code to Reticulum.</p>
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/understanding.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Communications Hardware" href="hardware.html" /><link rel="prev" title="Using Reticulum on Your System" href="using.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>Understanding Reticulum - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>Understanding Reticulum - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -1196,7 +1196,7 @@ those risks are acceptable to you.</p>
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/using.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Understanding Reticulum" href="understanding.html" /><link rel="prev" title="Getting Started Fast" href="gettingstartedfast.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>Using Reticulum on Your System - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>Using Reticulum on Your System - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -1057,7 +1057,7 @@ systemctl --user enable rnsd.service
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

docs/manual/whatis.html

@@ -6,7 +6,7 @@
 <link rel="index" title="Index" href="genindex.html" /><link rel="search" title="Search" href="search.html" /><link rel="next" title="Getting Started Fast" href="gettingstartedfast.html" /><link rel="prev" title="Reticulum Network Stack Manual" href="index.html" />
 
     <meta name="generator" content="sphinx-7.1.2, furo 2022.09.29.dev1"/>
-        <title>What is Reticulum? - Reticulum Network Stack 0.6.8 beta documentation</title>
+        <title>What is Reticulum? - Reticulum Network Stack 0.7.1 beta documentation</title>
       <link rel="stylesheet" type="text/css" href="_static/pygments.css?v=a746c00c" />
     <link rel="stylesheet" type="text/css" href="_static/styles/furo.css?digest=189ec851f9bb375a2509b67be1f64f0cf212b702" />
     <link rel="stylesheet" type="text/css" href="_static/copybutton.css?v=76b2166b" />
@@ -141,7 +141,7 @@
       </label>
     </div>
     <div class="header-center">
-      <a href="index.html"><div class="brand">Reticulum Network Stack 0.6.8 beta documentation</div></a>
+      <a href="index.html"><div class="brand">Reticulum Network Stack 0.7.1 beta documentation</div></a>
     </div>
     <div class="header-right">
       <div class="theme-toggle-container theme-toggle-header">
@@ -167,7 +167,7 @@
     <img class="sidebar-logo" src="_static/rns_logo_512.png" alt="Logo"/>
   </div>
   
-  <span class="sidebar-brand-text">Reticulum Network Stack 0.6.8 beta documentation</span>
+  <span class="sidebar-brand-text">Reticulum Network Stack 0.7.1 beta documentation</span>
   
 </a><form class="sidebar-search-container" method="get" action="search.html" role="search">
   <input class="sidebar-search" placeholder="Search" name="q" aria-label="Search">
@@ -434,7 +434,7 @@ want to help out with this, or can help sponsor an audit, please do get in touch
       
     </aside>
   </div>
-</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=e8582e68"></script>
+</div><script data-url_root="./" id="documentation_options" src="_static/documentation_options.js?v=2ae4a12b"></script>
     <script src="_static/doctools.js?v=888ff710"></script>
     <script src="_static/sphinx_highlight.js?v=4825356b"></script>
     <script src="_static/scripts/furo.js?v=2c7c1115"></script>

tests/link.py

@@ -189,6 +189,9 @@ class TestLink(unittest.TestCase):
         id1 = RNS.Identity.from_bytes(bytes.fromhex(fixed_keys[0][0]))
         self.assertEqual(id1.hash, bytes.fromhex(fixed_keys[0][1]))
 
+        RNS.Transport.request_path(bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
+        time.sleep(0.2)
+
         dest = RNS.Destination(id1, RNS.Destination.OUT, RNS.Destination.SINGLE, APP_NAME, "link", "establish")
 
         self.assertEqual(dest.hash, bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
@@ -204,6 +207,7 @@ class TestLink(unittest.TestCase):
         resource = RNS.Resource(data, l1, timeout=resource_timeout)
         start = time.time()
 
+        # This is a hack, don't do it. Use the callbacks instead.
         while resource.status < RNS.Resource.COMPLETE:
             time.sleep(0.01)
 
@@ -225,6 +229,9 @@ class TestLink(unittest.TestCase):
         id1 = RNS.Identity.from_bytes(bytes.fromhex(fixed_keys[0][0]))
         self.assertEqual(id1.hash, bytes.fromhex(fixed_keys[0][1]))
 
+        RNS.Transport.request_path(bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
+        time.sleep(0.2)
+
         dest = RNS.Destination(id1, RNS.Destination.OUT, RNS.Destination.SINGLE, APP_NAME, "link", "establish")
 
         self.assertEqual(dest.hash, bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
@@ -240,6 +247,7 @@ class TestLink(unittest.TestCase):
         resource = RNS.Resource(data, l1, timeout=resource_timeout)
         start = time.time()
 
+        # This is a hack, don't do it. Use the callbacks instead.
         while resource.status < RNS.Resource.COMPLETE:
             time.sleep(0.01)
 
@@ -261,6 +269,9 @@ class TestLink(unittest.TestCase):
         id1 = RNS.Identity.from_bytes(bytes.fromhex(fixed_keys[0][0]))
         self.assertEqual(id1.hash, bytes.fromhex(fixed_keys[0][1]))
 
+        RNS.Transport.request_path(bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
+        time.sleep(0.2)
+
         dest = RNS.Destination(id1, RNS.Destination.OUT, RNS.Destination.SINGLE, APP_NAME, "link", "establish")
         self.assertEqual(dest.hash, bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
         
@@ -275,6 +286,7 @@ class TestLink(unittest.TestCase):
         resource = RNS.Resource(data, l1, timeout=resource_timeout)
         start = time.time()
 
+        # This is a hack, don't do it. Use the callbacks instead.
         while resource.status < RNS.Resource.COMPLETE:
             time.sleep(0.01)
 
@@ -301,6 +313,9 @@ class TestLink(unittest.TestCase):
         id1 = RNS.Identity.from_bytes(bytes.fromhex(fixed_keys[0][0]))
         self.assertEqual(id1.hash, bytes.fromhex(fixed_keys[0][1]))
 
+        RNS.Transport.request_path(bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
+        time.sleep(0.2)
+
         dest = RNS.Destination(id1, RNS.Destination.OUT, RNS.Destination.SINGLE, APP_NAME, "link", "establish")
         self.assertEqual(dest.hash, bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
         
@@ -315,6 +330,7 @@ class TestLink(unittest.TestCase):
         resource = RNS.Resource(data, l1, timeout=resource_timeout)
         start = time.time()
 
+        # This is a hack, don't do it. Use the callbacks instead.
         while resource.status < RNS.Resource.COMPLETE:
             time.sleep(0.01)
 
@@ -326,6 +342,10 @@ class TestLink(unittest.TestCase):
         time.sleep(0.5)
         self.assertEqual(l1.status, RNS.Link.CLOSED)
 
+    large_resource_status = None
+    def lr_callback(self, resource):
+        TestLink.large_resource_status = resource.status
+
     @skipIf(os.getenv('SKIP_NORMAL_TESTS') != None, "Skipping")
     def test_9_large_resource(self):
         if RNS.Cryptography.backend() == "internal":
@@ -340,6 +360,9 @@ class TestLink(unittest.TestCase):
         id1 = RNS.Identity.from_bytes(bytes.fromhex(fixed_keys[0][0]))
         self.assertEqual(id1.hash, bytes.fromhex(fixed_keys[0][1]))
 
+        RNS.Transport.request_path(bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
+        time.sleep(0.2)
+
         dest = RNS.Destination(id1, RNS.Destination.OUT, RNS.Destination.SINGLE, APP_NAME, "link", "establish")
         self.assertEqual(dest.hash, bytes.fromhex("fb48da0e82e6e01ba0c014513f74540d"))
         
@@ -348,17 +371,18 @@ class TestLink(unittest.TestCase):
         self.assertEqual(l1.status, RNS.Link.ACTIVE)
 
         resource_timeout = 120
-        resource_size = 35*1000*1000
+        resource_size = 50*1000*1000
         data = os.urandom(resource_size)
         print("Sending "+self.size_str(resource_size)+" resource...")
-        resource = RNS.Resource(data, l1, timeout=resource_timeout)
+        resource = RNS.Resource(data, l1, timeout=resource_timeout, callback=self.lr_callback)
         start = time.time()
 
-        while resource.status < RNS.Resource.COMPLETE:
+        TestLink.large_resource_status = resource.status
+        while TestLink.large_resource_status < RNS.Resource.COMPLETE:
             time.sleep(0.01)
 
         t = time.time() - start
-        self.assertEqual(resource.status, RNS.Resource.COMPLETE)
+        self.assertEqual(TestLink.large_resource_status, RNS.Resource.COMPLETE)
         print("Resource completed at "+self.size_str(resource_size/t, "b")+"ps")
 
         l1.teardown()