Updated default config with examples and explanations.

This commit is contained in:
Mark Qvist 2020-04-27 10:19:49 +02:00
parent 9181179895
commit b78e0e9ec0
2 changed files with 338 additions and 145 deletions

View File

@ -70,7 +70,7 @@ class RNodeInterface(Interface):
RSSI_OFFSET = 157
SNR_OFFSET = 128
def __init__(self, owner, name, port, frequency = None, bandwidth = None, txpower = None, sf = None, flow_control = False):
def __init__(self, owner, name, port, frequency = None, bandwidth = None, txpower = None, sf = None, cr = None, flow_control = False):
self.serial = None
self.owner = owner
self.name = name
@ -86,7 +86,7 @@ class RNodeInterface(Interface):
self.bandwidth = bandwidth
self.txpower = txpower
self.sf = sf
self.cr = 5
self.cr = cr
self.state = KISS.RADIO_STATE_OFF
self.bitrate = 0
@ -123,6 +123,10 @@ class RNodeInterface(Interface):
RNS.log("Invalid spreading factor configured for "+str(self), RNS.LOG_ERROR)
self.validcfg = False
if (self.cr < 5 or self.sf > 8):
RNS.log("Invalid coding rate configured for "+str(self), RNS.LOG_ERROR)
self.validcfg = False
if (not self.validcfg):
raise ValueError("The configuration for "+str(self)+" contains errors, interface is offline")

View File

@ -102,161 +102,166 @@ class Reticulum:
for name in self.config["interfaces"]:
c = self.config["interfaces"][name]
try:
if c["type"] == "UdpInterface":
interface = UdpInterface.UdpInterface(
RNS.Transport,
name,
c["listen_ip"],
int(c["listen_port"]),
c["forward_ip"],
int(c["forward_port"])
)
if ("interface_enabled" in c) and c.as_bool("interface_enabled") == True:
if c["type"] == "UdpInterface":
interface = UdpInterface.UdpInterface(
RNS.Transport,
name,
c["listen_ip"],
int(c["listen_port"]),
c["forward_ip"],
int(c["forward_port"])
)
if "outgoing" in c and c["outgoing"].lower() == "true":
interface.OUT = True
else:
interface.OUT = False
if "outgoing" in c and c.as_bool("outgoing") == True:
interface.OUT = True
else:
interface.OUT = False
RNS.Transport.interfaces.append(interface)
RNS.Transport.interfaces.append(interface)
if c["type"] == "SerialInterface":
port = c["port"] if "port" in c else None
speed = int(c["speed"]) if "speed" in c else 9600
databits = int(c["databits"]) if "databits" in c else 8
parity = c["parity"] if "parity" in c else "N"
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
if c["type"] == "SerialInterface":
port = c["port"] if "port" in c else None
speed = int(c["speed"]) if "speed" in c else 9600
databits = int(c["databits"]) if "databits" in c else 8
parity = c["parity"] if "parity" in c else "N"
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
if port == None:
raise ValueError("No port specified for serial interface")
if port == None:
raise ValueError("No port specified for serial interface")
interface = SerialInterface.SerialInterface(
RNS.Transport,
name,
port,
speed,
databits,
parity,
stopbits
)
interface = SerialInterface.SerialInterface(
RNS.Transport,
name,
port,
speed,
databits,
parity,
stopbits
)
if "outgoing" in c and c["outgoing"].lower() == "true":
interface.OUT = True
else:
interface.OUT = False
if "outgoing" in c and c["outgoing"].lower() == "true":
interface.OUT = True
else:
interface.OUT = False
RNS.Transport.interfaces.append(interface)
RNS.Transport.interfaces.append(interface)
if c["type"] == "KISSInterface":
preamble = int(c["preamble"]) if "preamble" in c else None
txtail = int(c["txtail"]) if "txtail" in c else None
persistence = int(c["persistence"]) if "persistence" in c else None
slottime = int(c["slottime"]) if "slottime" in c else None
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
if c["type"] == "KISSInterface":
preamble = int(c["preamble"]) if "preamble" in c else None
txtail = int(c["txtail"]) if "txtail" in c else None
persistence = int(c["persistence"]) if "persistence" in c else None
slottime = int(c["slottime"]) if "slottime" in c else None
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
port = c["port"] if "port" in c else None
speed = int(c["speed"]) if "speed" in c else 9600
databits = int(c["databits"]) if "databits" in c else 8
parity = c["parity"] if "parity" in c else "N"
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
port = c["port"] if "port" in c else None
speed = int(c["speed"]) if "speed" in c else 9600
databits = int(c["databits"]) if "databits" in c else 8
parity = c["parity"] if "parity" in c else "N"
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
if port == None:
raise ValueError("No port specified for serial interface")
if port == None:
raise ValueError("No port specified for serial interface")
interface = KISSInterface.KISSInterface(
RNS.Transport,
name,
port,
speed,
databits,
parity,
stopbits,
preamble,
txtail,
persistence,
slottime,
flow_control
)
interface = KISSInterface.KISSInterface(
RNS.Transport,
name,
port,
speed,
databits,
parity,
stopbits,
preamble,
txtail,
persistence,
slottime,
flow_control
)
if "outgoing" in c and c["outgoing"].lower() == "true":
interface.OUT = True
else:
interface.OUT = False
if "outgoing" in c and c["outgoing"].lower() == "true":
interface.OUT = True
else:
interface.OUT = False
RNS.Transport.interfaces.append(interface)
RNS.Transport.interfaces.append(interface)
if c["type"] == "AX25KISSInterface":
preamble = int(c["preamble"]) if "preamble" in c else None
txtail = int(c["txtail"]) if "txtail" in c else None
persistence = int(c["persistence"]) if "persistence" in c else None
slottime = int(c["slottime"]) if "slottime" in c else None
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
if c["type"] == "AX25KISSInterface":
preamble = int(c["preamble"]) if "preamble" in c else None
txtail = int(c["txtail"]) if "txtail" in c else None
persistence = int(c["persistence"]) if "persistence" in c else None
slottime = int(c["slottime"]) if "slottime" in c else None
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
port = c["port"] if "port" in c else None
speed = int(c["speed"]) if "speed" in c else 9600
databits = int(c["databits"]) if "databits" in c else 8
parity = c["parity"] if "parity" in c else "N"
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
port = c["port"] if "port" in c else None
speed = int(c["speed"]) if "speed" in c else 9600
databits = int(c["databits"]) if "databits" in c else 8
parity = c["parity"] if "parity" in c else "N"
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
callsign = c["callsign"] if "callsign" in c else ""
ssid = int(c["ssid"]) if "ssid" in c else -1
callsign = c["callsign"] if "callsign" in c else ""
ssid = int(c["ssid"]) if "ssid" in c else -1
if port == None:
raise ValueError("No port specified for serial interface")
if port == None:
raise ValueError("No port specified for serial interface")
interface = AX25KISSInterface.AX25KISSInterface(
RNS.Transport,
name,
callsign,
ssid,
port,
speed,
databits,
parity,
stopbits,
preamble,
txtail,
persistence,
slottime,
flow_control
)
interface = AX25KISSInterface.AX25KISSInterface(
RNS.Transport,
name,
callsign,
ssid,
port,
speed,
databits,
parity,
stopbits,
preamble,
txtail,
persistence,
slottime,
flow_control
)
if "outgoing" in c and c["outgoing"].lower() == "true":
interface.OUT = True
else:
interface.OUT = False
if "outgoing" in c and c["outgoing"].lower() == "true":
interface.OUT = True
else:
interface.OUT = False
RNS.Transport.interfaces.append(interface)
RNS.Transport.interfaces.append(interface)
if c["type"] == "RNodeInterface":
frequency = int(c["frequency"]) if "frequency" in c else None
bandwidth = int(c["bandwidth"]) if "bandwidth" in c else None
txpower = int(c["txpower"]) if "txpower" in c else None
spreadingfactor = int(c["spreadingfactor"]) if "spreadingfactor" in c else None
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
if c["type"] == "RNodeInterface":
frequency = int(c["frequency"]) if "frequency" in c else None
bandwidth = int(c["bandwidth"]) if "bandwidth" in c else None
txpower = int(c["txpower"]) if "txpower" in c else None
spreadingfactor = int(c["spreadingfactor"]) if "spreadingfactor" in c else None
codingrate = int(c["codingrate"]) if "codingrate" in c else None
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
port = c["port"] if "port" in c else None
port = c["port"] if "port" in c else None
if port == None:
raise ValueError("No port specified for RNode interface")
if port == None:
raise ValueError("No port specified for RNode interface")
interface = RNodeInterface.RNodeInterface(
RNS.Transport,
name,
port,
frequency,
bandwidth,
txpower,
spreadingfactor,
flow_control
)
interface = RNodeInterface.RNodeInterface(
RNS.Transport,
name,
port,
frequency,
bandwidth,
txpower,
spreadingfactor,
flow_control
)
if "outgoing" in c and c["outgoing"].lower() == "true":
interface.OUT = True
else:
interface.OUT = False
if "outgoing" in c and c["outgoing"].lower() == "true":
interface.OUT = True
else:
interface.OUT = False
RNS.Transport.interfaces.append(interface)
RNS.Transport.interfaces.append(interface)
else:
RNS.log("Skipping disabled interface \""+name+"\"", RNS.LOG_VERBOSE)
except Exception as e:
RNS.log("The interface \""+name+"\" could not be created. Check your configuration file for errors!", RNS.LOG_ERROR)
@ -265,20 +270,9 @@ class Reticulum:
def createDefaultConfig(self):
self.config = ConfigObj()
self.config = ConfigObj(__default_rns_config__)
self.config.filename = Reticulum.configpath
self.config["reticulum"] = {}
self.config["reticulum"]["allow_unencrypted"] = False
self.config["logging"] = {}
self.config["logging"]["loglevel"] = 4
self.config["interfaces"] = {}
self.config["interfaces"]["Default UDP Interface"] = {}
self.config["interfaces"]["Default UDP Interface"]["type"] = "UdpInterface"
self.config["interfaces"]["Default UDP Interface"]["listen_ip"] = "0.0.0.0"
self.config["interfaces"]["Default UDP Interface"]["listen_port"] = 7777
self.config["interfaces"]["Default UDP Interface"]["forward_ip"] = "255.255.255.255"
self.config["interfaces"]["Default UDP Interface"]["forward_port"] = 7777
self.config["interfaces"]["Default UDP Interface"]["outgoing"] = "true"
if not os.path.isdir(Reticulum.configdir):
os.makedirs(Reticulum.configdir)
self.config.write()
@ -291,3 +285,198 @@ class Reticulum:
@staticmethod
def should_use_implicit_proof():
return Reticulum.__use_implicit_proof
# Default configuration file:
__default_rns_config__ = '''# This is the default Reticulum config file.
# You should probably edit it to include any additional,
# interfaces and settings you might need.
[reticulum]
# Don't allow unencrypted links by default.
# If you REALLY need to allow unencrypted links, for example
# for debug or regulatory purposes, this can be set to true.
allow_unencrypted = False
# If you enable Transport, your system will route traffic
# for other peers, pass announces and serve path requests.
# Unless you really know what you're doing, this should be
# done only for systems that are suited to act as transport
# nodes, ie. if they are stationary and always-on.
enable_transport = False
[logging]
# Valid log levels are 0 through 7:
# 0: Log only critical information
# 1: Log errors and lower log levels
# 2: Log warnings and lower log levels
# 3: Log notices and lower log levels
# 4: Log info and lower (this is the default)
# 5: Verbose logging
# 6: Debug logging
# 7: Extreme logging
loglevel = 4
# The interfaces section defines the physical and virtual
# interfaces Reticulum will use to communicate on. This
# section will contain examples for a variety of interface
# types. You can modify these or use them as a basis for
# your own config, or simply remove the unused ones.
[interfaces]
# This interface enables communication with other
# Reticulum nodes on your local ethernet networks.
[[Default UDP Interface]]
type = UdpInterface
interface_enabled = True
outgoing = True
listen_ip = 0.0.0.0
listen_port = 7777
forward_ip = 255.255.255.255
forward_port = 7777
# Here's an example of how to add a LoRa interface
# using the RNode LoRa transceiver.
[[RNode LoRa Interface]]
type = RNodeInterface
# Enable interface if you want use it!
interface_enabled = False
# Allow transmit on interface. Setting
# this to false will create a listen-
# only interface.
outgoing = true
# Serial port for the device
port = /dev/ttyUSB0
# Set frequency to 867.2 MHz
frequency = 867200000
# Set LoRa bandwidth to 125 KHz
bandwidth = 125000
# Set TX power to 7 dBm (5 mW)
txpower = 7
# Select spreading factor 8. Valid
# range is 7 through 12, with 7
# being the fastest and 12 having
# the longest range.
spreadingfactor = 8
# Select coding rate 5. Valid range
# is 5 throough 8, with 5 being the
# fastest, and 8 the longest range.
codingrate = 5
# An example KISS modem interface. Useful for running
# Reticulum over packet radio hardware.
[[Packet Radio KISS Interface]]
type = KISSInterface
# Enable interface if you want use it!
interface_enabled = False
# Allow transmit on interface.
outgoing = true
# Serial port for the device
port = /dev/ttyUSB1
# Set the serial baud-rate and other
# configuration parameters.
speed = 115200
databits = 8
parity = none
stopbits = 1
# Whether to use KISS flow-control.
# This is useful for modems with a
# small internal packet buffer.
flow_control = false
# Set the modem preamble. A 150ms
# preamble should be a reasonable
# default, but may need to be
# increased for radios with slow-
# opening squelch and long TX/RX
# turnaround
preamble = 150
# Set the modem TX tail. In most
# cases this should be kept as low
# as possible to not waste airtime.
txtail = 10
# Configure CDMA parameters. These
# settings are reasonable defaults.
persistence = 200
slottime = 20
# If you're using Reticulum on amateur radio spectrum,
# you might want to use the AX.25 KISS interface. This
# way, Reticulum will automatically encapsulate it's
# traffic in AX.25 and also identify your stations
# transmissions with your callsign and SSID.
#
# Only do this if you really need to! Reticulum doesn't
# need the AX.25 layer for anything, and it incurs extra
# overhead on every packet to encapsulate in AX.25.
[[Packet Radio AX.25 KISS Interface]]
type = AX25KISSInterface
# Set the station callsign and SSID
callsign = NO1CLL
ssid = 0
# Enable interface if you want use it!
interface_enabled = False
# Allow transmit on interface.
outgoing = true
# Serial port for the device
port = /dev/ttyUSB2
# Set the serial baud-rate and other
# configuration parameters.
speed = 115200
databits = 8
parity = none
stopbits = 1
# Whether to use KISS flow-control.
# This is useful for modems with a
# small internal packet buffer.
flow_control = false
# Set the modem preamble. A 150ms
# preamble should be a reasonable
# default, but may need to be
# increased for radios with slow-
# opening squelch and long TX/RX
# turnaround
preamble = 150
# Set the modem TX tail. In most
# cases this should be kept as low
# as possible to not waste airtime.
txtail = 10
# Configure CDMA parameters. These
# settings are reasonable defaults.
persistence = 200
slottime = 20
'''.splitlines()