Updated default config with examples and explanations.
This commit is contained in:
Mark Qvist
parent
9181179895
commit
b78e0e9ec0
|
|
@ -70,7 +70,7 @@ class RNodeInterface(Interface):
|
|||
RSSI_OFFSET = 157
|
||||
SNR_OFFSET = 128
|
||||
|
||||
def __init__(self, owner, name, port, frequency = None, bandwidth = None, txpower = None, sf = None, flow_control = False):
|
||||
def __init__(self, owner, name, port, frequency = None, bandwidth = None, txpower = None, sf = None, cr = None, flow_control = False):
|
||||
self.serial = None
|
||||
self.owner = owner
|
||||
self.name = name
|
||||
|
|
@ -86,7 +86,7 @@ class RNodeInterface(Interface):
|
|||
self.bandwidth = bandwidth
|
||||
self.txpower = txpower
|
||||
self.sf = sf
|
||||
self.cr = 5
|
||||
self.cr = cr
|
||||
self.state = KISS.RADIO_STATE_OFF
|
||||
self.bitrate = 0
|
||||
|
||||
|
|
@ -123,6 +123,10 @@ class RNodeInterface(Interface):
|
|||
RNS.log("Invalid spreading factor configured for "+str(self), RNS.LOG_ERROR)
|
||||
self.validcfg = False
|
||||
|
||||
if (self.cr < 5 or self.sf > 8):
|
||||
RNS.log("Invalid coding rate configured for "+str(self), RNS.LOG_ERROR)
|
||||
self.validcfg = False
|
||||
|
||||
if (not self.validcfg):
|
||||
raise ValueError("The configuration for "+str(self)+" contains errors, interface is offline")
|
||||
|
||||
|
|
|
|||
475
RNS/Reticulum.py
475
RNS/Reticulum.py
|
|
@ -102,161 +102,166 @@ class Reticulum:
|
|||
|
||||
for name in self.config["interfaces"]:
|
||||
c = self.config["interfaces"][name]
|
||||
|
||||
try:
|
||||
if c["type"] == "UdpInterface":
|
||||
interface = UdpInterface.UdpInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
c["listen_ip"],
|
||||
int(c["listen_port"]),
|
||||
c["forward_ip"],
|
||||
int(c["forward_port"])
|
||||
)
|
||||
if ("interface_enabled" in c) and c.as_bool("interface_enabled") == True:
|
||||
if c["type"] == "UdpInterface":
|
||||
interface = UdpInterface.UdpInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
c["listen_ip"],
|
||||
int(c["listen_port"]),
|
||||
c["forward_ip"],
|
||||
int(c["forward_port"])
|
||||
)
|
||||
|
||||
if "outgoing" in c and c["outgoing"].lower() == "true":
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
if "outgoing" in c and c.as_bool("outgoing") == True:
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
|
||||
if c["type"] == "SerialInterface":
|
||||
port = c["port"] if "port" in c else None
|
||||
speed = int(c["speed"]) if "speed" in c else 9600
|
||||
databits = int(c["databits"]) if "databits" in c else 8
|
||||
parity = c["parity"] if "parity" in c else "N"
|
||||
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
|
||||
if c["type"] == "SerialInterface":
|
||||
port = c["port"] if "port" in c else None
|
||||
speed = int(c["speed"]) if "speed" in c else 9600
|
||||
databits = int(c["databits"]) if "databits" in c else 8
|
||||
parity = c["parity"] if "parity" in c else "N"
|
||||
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
|
||||
|
||||
if port == None:
|
||||
raise ValueError("No port specified for serial interface")
|
||||
if port == None:
|
||||
raise ValueError("No port specified for serial interface")
|
||||
|
||||
interface = SerialInterface.SerialInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
port,
|
||||
speed,
|
||||
databits,
|
||||
parity,
|
||||
stopbits
|
||||
)
|
||||
interface = SerialInterface.SerialInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
port,
|
||||
speed,
|
||||
databits,
|
||||
parity,
|
||||
stopbits
|
||||
)
|
||||
|
||||
if "outgoing" in c and c["outgoing"].lower() == "true":
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
if "outgoing" in c and c["outgoing"].lower() == "true":
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
|
||||
if c["type"] == "KISSInterface":
|
||||
preamble = int(c["preamble"]) if "preamble" in c else None
|
||||
txtail = int(c["txtail"]) if "txtail" in c else None
|
||||
persistence = int(c["persistence"]) if "persistence" in c else None
|
||||
slottime = int(c["slottime"]) if "slottime" in c else None
|
||||
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
|
||||
if c["type"] == "KISSInterface":
|
||||
preamble = int(c["preamble"]) if "preamble" in c else None
|
||||
txtail = int(c["txtail"]) if "txtail" in c else None
|
||||
persistence = int(c["persistence"]) if "persistence" in c else None
|
||||
slottime = int(c["slottime"]) if "slottime" in c else None
|
||||
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
|
||||
|
||||
port = c["port"] if "port" in c else None
|
||||
speed = int(c["speed"]) if "speed" in c else 9600
|
||||
databits = int(c["databits"]) if "databits" in c else 8
|
||||
parity = c["parity"] if "parity" in c else "N"
|
||||
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
|
||||
port = c["port"] if "port" in c else None
|
||||
speed = int(c["speed"]) if "speed" in c else 9600
|
||||
databits = int(c["databits"]) if "databits" in c else 8
|
||||
parity = c["parity"] if "parity" in c else "N"
|
||||
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
|
||||
|
||||
if port == None:
|
||||
raise ValueError("No port specified for serial interface")
|
||||
if port == None:
|
||||
raise ValueError("No port specified for serial interface")
|
||||
|
||||
interface = KISSInterface.KISSInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
port,
|
||||
speed,
|
||||
databits,
|
||||
parity,
|
||||
stopbits,
|
||||
preamble,
|
||||
txtail,
|
||||
persistence,
|
||||
slottime,
|
||||
flow_control
|
||||
)
|
||||
interface = KISSInterface.KISSInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
port,
|
||||
speed,
|
||||
databits,
|
||||
parity,
|
||||
stopbits,
|
||||
preamble,
|
||||
txtail,
|
||||
persistence,
|
||||
slottime,
|
||||
flow_control
|
||||
)
|
||||
|
||||
if "outgoing" in c and c["outgoing"].lower() == "true":
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
if "outgoing" in c and c["outgoing"].lower() == "true":
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
|
||||
if c["type"] == "AX25KISSInterface":
|
||||
preamble = int(c["preamble"]) if "preamble" in c else None
|
||||
txtail = int(c["txtail"]) if "txtail" in c else None
|
||||
persistence = int(c["persistence"]) if "persistence" in c else None
|
||||
slottime = int(c["slottime"]) if "slottime" in c else None
|
||||
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
|
||||
if c["type"] == "AX25KISSInterface":
|
||||
preamble = int(c["preamble"]) if "preamble" in c else None
|
||||
txtail = int(c["txtail"]) if "txtail" in c else None
|
||||
persistence = int(c["persistence"]) if "persistence" in c else None
|
||||
slottime = int(c["slottime"]) if "slottime" in c else None
|
||||
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
|
||||
|
||||
port = c["port"] if "port" in c else None
|
||||
speed = int(c["speed"]) if "speed" in c else 9600
|
||||
databits = int(c["databits"]) if "databits" in c else 8
|
||||
parity = c["parity"] if "parity" in c else "N"
|
||||
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
|
||||
port = c["port"] if "port" in c else None
|
||||
speed = int(c["speed"]) if "speed" in c else 9600
|
||||
databits = int(c["databits"]) if "databits" in c else 8
|
||||
parity = c["parity"] if "parity" in c else "N"
|
||||
stopbits = int(c["stopbits"]) if "stopbits" in c else 1
|
||||
|
||||
callsign = c["callsign"] if "callsign" in c else ""
|
||||
ssid = int(c["ssid"]) if "ssid" in c else -1
|
||||
callsign = c["callsign"] if "callsign" in c else ""
|
||||
ssid = int(c["ssid"]) if "ssid" in c else -1
|
||||
|
||||
if port == None:
|
||||
raise ValueError("No port specified for serial interface")
|
||||
if port == None:
|
||||
raise ValueError("No port specified for serial interface")
|
||||
|
||||
interface = AX25KISSInterface.AX25KISSInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
callsign,
|
||||
ssid,
|
||||
port,
|
||||
speed,
|
||||
databits,
|
||||
parity,
|
||||
stopbits,
|
||||
preamble,
|
||||
txtail,
|
||||
persistence,
|
||||
slottime,
|
||||
flow_control
|
||||
)
|
||||
interface = AX25KISSInterface.AX25KISSInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
callsign,
|
||||
ssid,
|
||||
port,
|
||||
speed,
|
||||
databits,
|
||||
parity,
|
||||
stopbits,
|
||||
preamble,
|
||||
txtail,
|
||||
persistence,
|
||||
slottime,
|
||||
flow_control
|
||||
)
|
||||
|
||||
if "outgoing" in c and c["outgoing"].lower() == "true":
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
if "outgoing" in c and c["outgoing"].lower() == "true":
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
|
||||
if c["type"] == "RNodeInterface":
|
||||
frequency = int(c["frequency"]) if "frequency" in c else None
|
||||
bandwidth = int(c["bandwidth"]) if "bandwidth" in c else None
|
||||
txpower = int(c["txpower"]) if "txpower" in c else None
|
||||
spreadingfactor = int(c["spreadingfactor"]) if "spreadingfactor" in c else None
|
||||
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
|
||||
if c["type"] == "RNodeInterface":
|
||||
frequency = int(c["frequency"]) if "frequency" in c else None
|
||||
bandwidth = int(c["bandwidth"]) if "bandwidth" in c else None
|
||||
txpower = int(c["txpower"]) if "txpower" in c else None
|
||||
spreadingfactor = int(c["spreadingfactor"]) if "spreadingfactor" in c else None
|
||||
codingrate = int(c["codingrate"]) if "codingrate" in c else None
|
||||
flow_control = (True if c["flow_control"] == "true" else False) if "flow_control" in c else False
|
||||
|
||||
port = c["port"] if "port" in c else None
|
||||
|
||||
if port == None:
|
||||
raise ValueError("No port specified for RNode interface")
|
||||
port = c["port"] if "port" in c else None
|
||||
|
||||
if port == None:
|
||||
raise ValueError("No port specified for RNode interface")
|
||||
|
||||
interface = RNodeInterface.RNodeInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
port,
|
||||
frequency,
|
||||
bandwidth,
|
||||
txpower,
|
||||
spreadingfactor,
|
||||
flow_control
|
||||
)
|
||||
interface = RNodeInterface.RNodeInterface(
|
||||
RNS.Transport,
|
||||
name,
|
||||
port,
|
||||
frequency,
|
||||
bandwidth,
|
||||
txpower,
|
||||
spreadingfactor,
|
||||
flow_control
|
||||
)
|
||||
|
||||
if "outgoing" in c and c["outgoing"].lower() == "true":
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
if "outgoing" in c and c["outgoing"].lower() == "true":
|
||||
interface.OUT = True
|
||||
else:
|
||||
interface.OUT = False
|
||||
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
RNS.Transport.interfaces.append(interface)
|
||||
else:
|
||||
RNS.log("Skipping disabled interface \""+name+"\"", RNS.LOG_VERBOSE)
|
||||
|
||||
except Exception as e:
|
||||
RNS.log("The interface \""+name+"\" could not be created. Check your configuration file for errors!", RNS.LOG_ERROR)
|
||||
|
|
@ -265,20 +270,9 @@ class Reticulum:
|
|||
|
||||
|
||||
def createDefaultConfig(self):
|
||||
self.config = ConfigObj()
|
||||
self.config = ConfigObj(__default_rns_config__)
|
||||
self.config.filename = Reticulum.configpath
|
||||
self.config["reticulum"] = {}
|
||||
self.config["reticulum"]["allow_unencrypted"] = False
|
||||
self.config["logging"] = {}
|
||||
self.config["logging"]["loglevel"] = 4
|
||||
self.config["interfaces"] = {}
|
||||
self.config["interfaces"]["Default UDP Interface"] = {}
|
||||
self.config["interfaces"]["Default UDP Interface"]["type"] = "UdpInterface"
|
||||
self.config["interfaces"]["Default UDP Interface"]["listen_ip"] = "0.0.0.0"
|
||||
self.config["interfaces"]["Default UDP Interface"]["listen_port"] = 7777
|
||||
self.config["interfaces"]["Default UDP Interface"]["forward_ip"] = "255.255.255.255"
|
||||
self.config["interfaces"]["Default UDP Interface"]["forward_port"] = 7777
|
||||
self.config["interfaces"]["Default UDP Interface"]["outgoing"] = "true"
|
||||
|
||||
if not os.path.isdir(Reticulum.configdir):
|
||||
os.makedirs(Reticulum.configdir)
|
||||
self.config.write()
|
||||
|
|
@ -290,4 +284,199 @@ class Reticulum:
|
|||
|
||||
@staticmethod
|
||||
def should_use_implicit_proof():
|
||||
return Reticulum.__use_implicit_proof
|
||||
return Reticulum.__use_implicit_proof
|
||||
|
||||
# Default configuration file:
|
||||
__default_rns_config__ = '''# This is the default Reticulum config file.
|
||||
# You should probably edit it to include any additional,
|
||||
# interfaces and settings you might need.
|
||||
|
||||
[reticulum]
|
||||
|
||||
# Don't allow unencrypted links by default.
|
||||
# If you REALLY need to allow unencrypted links, for example
|
||||
# for debug or regulatory purposes, this can be set to true.
|
||||
allow_unencrypted = False
|
||||
|
||||
# If you enable Transport, your system will route traffic
|
||||
# for other peers, pass announces and serve path requests.
|
||||
# Unless you really know what you're doing, this should be
|
||||
# done only for systems that are suited to act as transport
|
||||
# nodes, ie. if they are stationary and always-on.
|
||||
enable_transport = False
|
||||
|
||||
|
||||
[logging]
|
||||
# Valid log levels are 0 through 7:
|
||||
# 0: Log only critical information
|
||||
# 1: Log errors and lower log levels
|
||||
# 2: Log warnings and lower log levels
|
||||
# 3: Log notices and lower log levels
|
||||
# 4: Log info and lower (this is the default)
|
||||
# 5: Verbose logging
|
||||
# 6: Debug logging
|
||||
# 7: Extreme logging
|
||||
|
||||
loglevel = 4
|
||||
|
||||
|
||||
# The interfaces section defines the physical and virtual
|
||||
# interfaces Reticulum will use to communicate on. This
|
||||
# section will contain examples for a variety of interface
|
||||
# types. You can modify these or use them as a basis for
|
||||
# your own config, or simply remove the unused ones.
|
||||
|
||||
[interfaces]
|
||||
|
||||
# This interface enables communication with other
|
||||
# Reticulum nodes on your local ethernet networks.
|
||||
[[Default UDP Interface]]
|
||||
type = UdpInterface
|
||||
interface_enabled = True
|
||||
outgoing = True
|
||||
listen_ip = 0.0.0.0
|
||||
listen_port = 7777
|
||||
forward_ip = 255.255.255.255
|
||||
forward_port = 7777
|
||||
|
||||
|
||||
# Here's an example of how to add a LoRa interface
|
||||
# using the RNode LoRa transceiver.
|
||||
|
||||
[[RNode LoRa Interface]]
|
||||
type = RNodeInterface
|
||||
|
||||
# Enable interface if you want use it!
|
||||
interface_enabled = False
|
||||
|
||||
# Allow transmit on interface. Setting
|
||||
# this to false will create a listen-
|
||||
# only interface.
|
||||
outgoing = true
|
||||
|
||||
# Serial port for the device
|
||||
port = /dev/ttyUSB0
|
||||
|
||||
# Set frequency to 867.2 MHz
|
||||
frequency = 867200000
|
||||
|
||||
# Set LoRa bandwidth to 125 KHz
|
||||
bandwidth = 125000
|
||||
|
||||
# Set TX power to 7 dBm (5 mW)
|
||||
txpower = 7
|
||||
|
||||
# Select spreading factor 8. Valid
|
||||
# range is 7 through 12, with 7
|
||||
# being the fastest and 12 having
|
||||
# the longest range.
|
||||
spreadingfactor = 8
|
||||
|
||||
# Select coding rate 5. Valid range
|
||||
# is 5 throough 8, with 5 being the
|
||||
# fastest, and 8 the longest range.
|
||||
codingrate = 5
|
||||
|
||||
# An example KISS modem interface. Useful for running
|
||||
# Reticulum over packet radio hardware.
|
||||
|
||||
[[Packet Radio KISS Interface]]
|
||||
type = KISSInterface
|
||||
|
||||
# Enable interface if you want use it!
|
||||
interface_enabled = False
|
||||
|
||||
# Allow transmit on interface.
|
||||
outgoing = true
|
||||
|
||||
# Serial port for the device
|
||||
port = /dev/ttyUSB1
|
||||
|
||||
# Set the serial baud-rate and other
|
||||
# configuration parameters.
|
||||
speed = 115200
|
||||
databits = 8
|
||||
parity = none
|
||||
stopbits = 1
|
||||
|
||||
# Whether to use KISS flow-control.
|
||||
# This is useful for modems with a
|
||||
# small internal packet buffer.
|
||||
flow_control = false
|
||||
|
||||
# Set the modem preamble. A 150ms
|
||||
# preamble should be a reasonable
|
||||
# default, but may need to be
|
||||
# increased for radios with slow-
|
||||
# opening squelch and long TX/RX
|
||||
# turnaround
|
||||
preamble = 150
|
||||
|
||||
# Set the modem TX tail. In most
|
||||
# cases this should be kept as low
|
||||
# as possible to not waste airtime.
|
||||
txtail = 10
|
||||
|
||||
# Configure CDMA parameters. These
|
||||
# settings are reasonable defaults.
|
||||
persistence = 200
|
||||
slottime = 20
|
||||
|
||||
# If you're using Reticulum on amateur radio spectrum,
|
||||
# you might want to use the AX.25 KISS interface. This
|
||||
# way, Reticulum will automatically encapsulate it's
|
||||
# traffic in AX.25 and also identify your stations
|
||||
# transmissions with your callsign and SSID.
|
||||
#
|
||||
# Only do this if you really need to! Reticulum doesn't
|
||||
# need the AX.25 layer for anything, and it incurs extra
|
||||
# overhead on every packet to encapsulate in AX.25.
|
||||
|
||||
[[Packet Radio AX.25 KISS Interface]]
|
||||
type = AX25KISSInterface
|
||||
|
||||
# Set the station callsign and SSID
|
||||
callsign = NO1CLL
|
||||
ssid = 0
|
||||
|
||||
# Enable interface if you want use it!
|
||||
interface_enabled = False
|
||||
|
||||
# Allow transmit on interface.
|
||||
outgoing = true
|
||||
|
||||
# Serial port for the device
|
||||
port = /dev/ttyUSB2
|
||||
|
||||
# Set the serial baud-rate and other
|
||||
# configuration parameters.
|
||||
speed = 115200
|
||||
databits = 8
|
||||
parity = none
|
||||
stopbits = 1
|
||||
|
||||
# Whether to use KISS flow-control.
|
||||
# This is useful for modems with a
|
||||
# small internal packet buffer.
|
||||
flow_control = false
|
||||
|
||||
# Set the modem preamble. A 150ms
|
||||
# preamble should be a reasonable
|
||||
# default, but may need to be
|
||||
# increased for radios with slow-
|
||||
# opening squelch and long TX/RX
|
||||
# turnaround
|
||||
preamble = 150
|
||||
|
||||
# Set the modem TX tail. In most
|
||||
# cases this should be kept as low
|
||||
# as possible to not waste airtime.
|
||||
txtail = 10
|
||||
|
||||
# Configure CDMA parameters. These
|
||||
# settings are reasonable defaults.
|
||||
persistence = 200
|
||||
slottime = 20
|
||||
|
||||
|
||||
'''.splitlines()
|
||||
Loading…
Reference in New Issue