mirror of
https://github.com/markqvist/Reticulum.git
synced 2024-11-22 13:40:19 +00:00
Added I2P interface documentation
This commit is contained in:
Mark Qvist
parent
f8272793b4
commit
87a274d177
@ -22,7 +22,7 @@ copyright = '2021, Mark Qvist'
|
||||
author = 'Mark Qvist'
|
||||
|
||||
# The full version, including alpha/beta/rc tags
|
||||
release = '0.3.2 beta'
|
||||
release = '0.3.3 beta'
|
||||
|
||||
|
||||
# -- General configuration ---------------------------------------------------
|
||||
|
||||
@ -39,7 +39,6 @@ system, which should be enabled by default in almost all OSes.
|
||||
[[Default Interface]]
|
||||
type = AutoInterface
|
||||
interface_enabled = True
|
||||
outgoing = True
|
||||
|
||||
# You can create multiple isolated Reticulum
|
||||
# networks on the same physical LAN by
|
||||
@ -69,7 +68,6 @@ the discovery scope by setting it to one of ``link``, ``admin``, ``site``,
|
||||
[[Default Interface]]
|
||||
type = AutoInterface
|
||||
interface_enabled = True
|
||||
outgoing = True
|
||||
|
||||
# Configure global discovery
|
||||
|
||||
@ -81,9 +79,6 @@ the discovery scope by setting it to one of ``link``, ``admin``, ``site``,
|
||||
discovery_port = 48555
|
||||
data_port = 49555
|
||||
|
||||
*Please Note!* If you use the Auto Interface, you will need the Python module
|
||||
``netifaces`` installed on your system. You can install it with ``pip3 install netifaces``.
|
||||
|
||||
|
||||
.. _interfaces-udp:
|
||||
|
||||
@ -113,7 +108,7 @@ pre-existing LAN.
|
||||
[[Default UDP Interface]]
|
||||
type = UDPInterface
|
||||
interface_enabled = True
|
||||
outgoing = True
|
||||
|
||||
listen_ip = 0.0.0.0
|
||||
listen_port = 4242
|
||||
forward_ip = 255.255.255.255
|
||||
@ -149,8 +144,70 @@ pre-existing LAN.
|
||||
# forward_ip = 10.55.0.16
|
||||
# forward_port = 4242
|
||||
|
||||
*Please Note!* If you use the ``device`` option, you will need the Python module
|
||||
``netifaces`` installed on your system. You can install it with ``pip3 install netifaces``.
|
||||
|
||||
.. _interfaces-i2p:
|
||||
|
||||
I2P Interface
|
||||
=============
|
||||
|
||||
The I2P interface lets you connect Reticulum instances over the
|
||||
`Invisible Internet Protocol <https://i2pd.website>`_. This can be
|
||||
especially useful in cases where you want to host a globally reachable
|
||||
Reticulum instance, but do not have access to any public IP addresses,
|
||||
have a frequently changing IP address, or have firewalls blocking
|
||||
inbound traffic.
|
||||
|
||||
Using the I2P interface, you will get a globally reachable, portable
|
||||
and persistent I2P address that your Reticulum instance can be reached
|
||||
at. The I2P
|
||||
|
||||
To use the I2P interface, you must have an I2P router running
|
||||
on your system. The easiest way to acheive this is to download and
|
||||
install the `latest release <https://github.com/PurpleI2P/i2pd/releases/latest>`_
|
||||
of the ``ì2pd```package. For more details about I2P, see the
|
||||
`geti2p.net website <https://geti2p.net/en/about/intro>`_.`
|
||||
|
||||
When an I2P router is running on your system, you can simply add
|
||||
an I2P interface to reticulum:
|
||||
|
||||
.. code::
|
||||
|
||||
[[I2P]]
|
||||
type = I2PInterface
|
||||
interface_enabled = yes
|
||||
|
||||
On the first start, Reticulum will generate a new I2P address for the
|
||||
interface and start listening for inbound traffic on it. This can take
|
||||
a while the first time, especially if your I2P router was also just
|
||||
started, and is not yet well-connected to the I2P network. When ready,
|
||||
you should see I2P base32 address printed to your log file. You can
|
||||
also inspect the status of the interface using the ``rnstatus`` utility.
|
||||
|
||||
To connect to other Reticulum instances over I2P, just add a comma-separated
|
||||
list of I2P base32 addresses to the ``peers```option of the interface:
|
||||
|
||||
.. code::
|
||||
|
||||
[[I2P]]
|
||||
type = I2PInterface
|
||||
interface_enabled = yes
|
||||
peers = 5urvjicpzi7q3ybztsef4i5ow2aq4soktfj7zedz53s47r54jnqq.b32.i2p
|
||||
|
||||
It can take anywhere from a few seconds to a few minutes to establish
|
||||
I2P connections to the desired peers, so Reticulum handles the process
|
||||
in the background, and will output relevant events to the log.
|
||||
|
||||
**Please Note!** While the I2P interface is the simplest way to use
|
||||
Reticulum over I2P, it is also possible to tunnel the TCP server and
|
||||
client interfaces over I2P manually. This can be useful in situations
|
||||
where more control is needed, but requires manual tunnel setup through
|
||||
the I2P daemon configuration.
|
||||
|
||||
It is important to note that the two methods are *interchangably compatible*.
|
||||
You can use the I2PInterface to connect to a TCPServerInterface that
|
||||
was manually tunneled over I2P, for example. This offers a high degree
|
||||
of flexibility in network setup, while retaining ease of use in simpler
|
||||
use-cases.
|
||||
|
||||
.. _interfaces-tcps:
|
||||
|
||||
@ -170,7 +227,6 @@ configured, other Reticulum peers can connect to it with a TCP Client interface.
|
||||
[[TCP Server Interface]]
|
||||
type = TCPServerInterface
|
||||
interface_enabled = True
|
||||
outgoing = True
|
||||
|
||||
# This configuration will listen on all IP
|
||||
# interfaces on port 4242
|
||||
@ -188,18 +244,14 @@ configured, other Reticulum peers can connect to it with a TCP Client interface.
|
||||
# device = eth0
|
||||
# port = 4242
|
||||
|
||||
*Please Note!* If you use the ``device`` option, you will need the Python module
|
||||
``netifaces`` installed on your system. You can install it with ``pip3 install netifaces``.
|
||||
|
||||
**Caution!** The TCP interfaces support tunneling over I2P, but to do so reliably,
|
||||
you should use the i2p_tunneled option:
|
||||
**Please Note!** The TCP interfaces support tunneling over I2P, but to do so reliably,
|
||||
you must use the i2p_tunneled option:
|
||||
|
||||
.. code::
|
||||
|
||||
[[TCP Server on I2P]]
|
||||
type = TCPServerInterface
|
||||
interface_enabled = yes
|
||||
outgoing = yes
|
||||
listen_ip = 127.0.0.1
|
||||
listen_port = 5001
|
||||
i2p_tunneled = yes
|
||||
@ -221,7 +273,6 @@ same TCP Server interface at the same time.
|
||||
[[TCP Client Interface]]
|
||||
type = TCPClientInterface
|
||||
interface_enabled = True
|
||||
outgoing = True
|
||||
target_host = 127.0.0.1
|
||||
target_port = 4242
|
||||
|
||||
@ -237,7 +288,6 @@ software-based soundmodems. To do this, use the ``kiss_framing`` option:
|
||||
[[TCP KISS Interface]]
|
||||
type = TCPClientInterface
|
||||
interface_enabled = True
|
||||
outgoing = True
|
||||
kiss_framing = True
|
||||
target_host = 127.0.0.1
|
||||
target_port = 8001
|
||||
@ -249,15 +299,14 @@ never enable ``kiss_framing``, since this will disable internal reliability and
|
||||
recovery mechanisms that greatly improves performance over unreliable and
|
||||
intermittent TCP links.
|
||||
|
||||
**Caution!** The TCP interfaces support tunneling over I2P, but to do so reliably,
|
||||
you should use the i2p_tunneled option:
|
||||
**Please Note!** The TCP interfaces support tunneling over I2P, but to do so reliably,
|
||||
you must use the i2p_tunneled option:
|
||||
|
||||
.. code::
|
||||
|
||||
[[TCP Client over I2P]]
|
||||
type = TCPClientInterface
|
||||
interface_enabled = yes
|
||||
outgoing = yes
|
||||
target_host = 127.0.0.1
|
||||
target_port = 5001
|
||||
i2p_tunneled = yes
|
||||
@ -282,11 +331,6 @@ can be used, and offers full control over LoRa parameters.
|
||||
# Enable interface if you want use it!
|
||||
interface_enabled = True
|
||||
|
||||
# Allow transmit on interface. Setting
|
||||
# this to false will create a listen-
|
||||
# only interface.
|
||||
outgoing = true
|
||||
|
||||
# Serial port for the device
|
||||
port = /dev/ttyUSB0
|
||||
|
||||
@ -337,7 +381,6 @@ directly over a wire-pair, or for using devices such as data radios and lasers.
|
||||
[[Serial Interface]]
|
||||
type = SerialInterface
|
||||
interface_enabled = True
|
||||
outgoing = True
|
||||
|
||||
# Serial port for the device
|
||||
port = /dev/ttyUSB0
|
||||
@ -364,7 +407,6 @@ for station identification purposes.
|
||||
[[Packet Radio KISS Interface]]
|
||||
type = KISSInterface
|
||||
interface_enabled = True
|
||||
outgoing = true
|
||||
|
||||
# Serial port for the device
|
||||
port = /dev/ttyUSB1
|
||||
@ -435,9 +477,6 @@ beaconing functionality described above.
|
||||
# Enable interface if you want use it!
|
||||
interface_enabled = True
|
||||
|
||||
# Allow transmit on interface.
|
||||
outgoing = True
|
||||
|
||||
# Serial port for the device
|
||||
port = /dev/ttyUSB2
|
||||
|
||||
@ -470,3 +509,38 @@ beaconing functionality described above.
|
||||
# This is useful for modems with a
|
||||
# small internal packet buffer.
|
||||
flow_control = false
|
||||
|
||||
|
||||
.. _interfaces-options:
|
||||
|
||||
Common Interface Options
|
||||
========================
|
||||
|
||||
A number of general options can be used to control various
|
||||
aspects of interface behaviour.
|
||||
|
||||
The ``outgoing`` option sets whether an interface is allowed
|
||||
to transmit. Defaults to ``True``. If set to ``False`` the
|
||||
interface will only receive data, and never transmit.
|
||||
|
||||
The ``interface_mode`` option allows selecting the high-level
|
||||
behaviour of the interface from a number of options.
|
||||
|
||||
- The default value is ``full``. In this mode, all discovery,
|
||||
meshing and transpor functionality is available.
|
||||
|
||||
- In the ``access_point`` (or shorthand ``ap``) mode, the
|
||||
interface will operate as a network access point. In this
|
||||
mode, announces will not be automatically broadcasted on
|
||||
the interface, and paths to destinations on the interface
|
||||
will have a much shorter expiry time. This mode is useful
|
||||
for creating interfaces that are mostly quiet, unless when
|
||||
someone is actually using them. An example of this could
|
||||
be a radio interface serving a wide area, where users are
|
||||
expected to connect momentarily, use the network, and then
|
||||
disappear again.
|
||||
|
||||
The ``interface_enabled`` option tells Reticulum whether or not
|
||||
to bring up the interface. Defaults to ``False``. For any
|
||||
interface to be brought up, the ``interface_enabled`` option
|
||||
must be set to ``True`` or ``Yes``.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user