Updated rnodeconf install guide

This commit is contained in:
Mark Qvist 2023-01-11 11:45:10 +01:00
parent e18f6d2969
commit 32922868b9

View File

@ -1053,6 +1053,9 @@ def main():
from cryptography.hazmat.primitives.asymmetric import padding
if args.autoinstall:
clear = lambda: os.system('clear')
clear()
if not args.port:
print("\nHello!\n\nThis guide will help you install the RNode firmware on supported")
print("and homebrew devices. Please connect the device you wish to set\nup now. Hit enter when it is connected.")
input()
@ -1073,7 +1076,7 @@ def main():
print(" ["+str(pi)+"] "+str(port.device)+" ("+str(port.product)+", "+str(port.serial_number)+")")
pi += 1
print("\nEnter the number of the serial port your device is connected to: ", end="")
print("\nEnter the number of the serial port your device is connected to:\n? ", end="")
try:
c_port = int(input())
if c_port < 1 or c_port > len(ports):
@ -1092,6 +1095,7 @@ def main():
port_product = selected_port.product
port_serialno = selected_port.serial_number
clear()
print("\nOk, using device on "+str(port_path)+" ("+str(port_product)+", "+str(port_serialno)+")")
else:
@ -1137,6 +1141,8 @@ def main():
print("wipe the current EEPROM. See the help for more info.\n\nExiting now.")
exit()
print("\n---------------------------------------------------------------------------")
print(" Device Selection")
if rnode.detected:
print("\nThe device seems to have an RNode firmware installed, but it was not")
print("provisioned correctly, or it is corrupt. We are going to reinstall the")
@ -1144,14 +1150,28 @@ def main():
else:
print("\nIt looks like this is a fresh device with no RNode firmware.")
print("")
print("What kind of device is this?\n")
print("[1] RNode from Unsigned.io")
print("[1] A specific kind of RNode")
print(" .")
print(" / \\ Select this option if you have an RNode of a specific")
print(" | type, built from a recipe or bought from a vendor.")
print("")
print("[2] Homebrew RNode")
print("[3] LilyGO T-Beam")
print("[4] LilyGO LoRa32 v2.0")
print("[5] LilyGO LoRa32 v2.1")
print(" .")
print(" / \\ Select this option if you have put toghether an RNode")
print(" | of your own design, or if you are prototyping one.")
print("")
print("[3] LilyGO LoRa32 v2.1 (aka T3 v1.6.1)")
print("[4] LilyGO LoRa32 v2.0 (aka T3 v1.6)")
print("[5] LilyGO T-Beam")
print("[6] Heltec LoRa32 v2")
print("\n? ", end="")
print(" .")
print(" / \\ Select one of these options if you want to easily turn")
print(" | a supported development board into an RNode.")
print("")
print("---------------------------------------------------------------------------")
print("\nEnter the number that matches your device type:\n? ", end="")
selected_product = None
try:
@ -1162,18 +1182,32 @@ def main():
selected_product = ROM.PRODUCT_RNODE
elif c_dev == 2:
selected_product = ROM.PRODUCT_HMBRW
clear()
print("")
print("---------------------------------------------------------------------------")
print(" Homebrew RNode Installer")
print("")
print("This option allows you to install and provision the RNode firmware on a")
print("custom board design, or a custom device created by coupling a generic")
print("development board with a supported transceiver module.")
print("")
print("Important! Using RNode firmware on homebrew devices should currently be")
print("considered experimental. It is not intended for production or critical use.")
print("The currently supplied firmware is provided AS-IS as a courtesey to those")
print("who would like to experiment with it. Hit enter to continue.")
print("---------------------------------------------------------------------------")
input()
elif c_dev == 3:
elif c_dev == 5:
selected_product = ROM.PRODUCT_TBEAM
clear()
print("")
print("---------------------------------------------------------------------------")
print(" T-Beam RNode Installer")
print("")
print("The RNode firmware can currently be installed on T-Beam devices using the")
print("SX1276 and SX1278 transceiver chips. Support for devices with the newer")
print("SX1262 and SX1268 chips is in development.")
print("")
print("Important! Using RNode firmware on T-Beam devices should currently be")
print("considered experimental. It is not intended for production or critical use.")
print("The currently supplied firmware is provided AS-IS as a courtesey to those")
@ -1182,18 +1216,24 @@ def main():
input()
elif c_dev == 4:
selected_product = ROM.PRODUCT_T32_20
clear()
print("")
print("---------------------------------------------------------------------------")
print(" LilyGO LoRa32 v2.0 RNode Installer")
print("")
print("Important! Using RNode firmware on LoRa32 devices should currently be")
print("considered experimental. It is not intended for production or critical use.")
print("The currently supplied firmware is provided AS-IS as a courtesey to those")
print("who would like to experiment with it. Hit enter to continue.")
print("---------------------------------------------------------------------------")
input()
elif c_dev == 5:
elif c_dev == 3:
selected_product = ROM.PRODUCT_T32_21
clear()
print("")
print("---------------------------------------------------------------------------")
print(" LilyGO LoRa32 v2.1 RNode Installer")
print("")
print("Important! Using RNode firmware on LoRa32 devices should currently be")
print("considered experimental. It is not intended for production or critical use.")
print("The currently supplied firmware is provided AS-IS as a courtesey to those")
@ -1202,8 +1242,11 @@ def main():
input()
elif c_dev == 6:
selected_product = ROM.PRODUCT_H32_V2
clear()
print("")
print("---------------------------------------------------------------------------")
print(" Heltec LoRa32 v2.0 RNode Installer")
print("")
print("Important! Using RNode firmware on Heltec devices should currently be")
print("considered experimental. It is not intended for production or critical use.")
print("")
@ -1269,39 +1312,39 @@ def main():
elif selected_product == ROM.PRODUCT_RNODE:
selected_mcu = ROM.MCU_1284P
print("\nWhat model is this RNode?\n")
print("[1] Original v1.x RNode, 410 - 525 MHz")
print("[2] Original v1.x RNode, 820 - 1020 MHz")
print("[3] Prototype v2 RNode, 410 - 525 MHz")
print("[4] Prototype v2 RNode, 820 - 1020 MHz")
print("[5] RNode v2.x, 410 - 525 MHz")
print("[6] RNode v2.x, 820 - 1020 MHz")
print("[1] Handheld v2.x RNode, 410 - 525 MHz")
print("[2] Handheld v2.x RNode, 820 - 1020 MHz")
print("[3] Original v1.x RNode, 410 - 525 MHz")
print("[4] Original v1.x RNode, 820 - 1020 MHz")
# print("[5] Prototype v2 RNode, 410 - 525 MHz")
# print("[6] Prototype v2 RNode, 820 - 1020 MHz")
print("\n? ", end="")
try:
c_model = int(input())
if c_model < 1 or c_model > 6:
raise ValueError()
elif c_model == 1:
elif c_model == 3:
selected_model = ROM.MODEL_A4
selected_platform = ROM.PLATFORM_AVR
elif c_model == 2:
elif c_model == 4:
selected_model = ROM.MODEL_A9
selected_platform = ROM.PLATFORM_AVR
elif c_model == 3:
selected_model = ROM.MODEL_A3
selected_mcu = ROM.MCU_ESP32
selected_platform = ROM.PLATFORM_ESP32
elif c_model == 4:
selected_model = ROM.MODEL_A8
selected_mcu = ROM.MCU_ESP32
selected_platform = ROM.PLATFORM_ESP32
elif c_model == 5:
elif c_model == 1:
selected_model = ROM.MODEL_A2
selected_mcu = ROM.MCU_ESP32
selected_platform = ROM.PLATFORM_ESP32
elif c_model == 6:
elif c_model == 2:
selected_model = ROM.MODEL_A7
selected_mcu = ROM.MCU_ESP32
selected_platform = ROM.PLATFORM_ESP32
# elif c_model == 5:
# selected_model = ROM.MODEL_A3
# selected_mcu = ROM.MCU_ESP32
# selected_platform = ROM.PLATFORM_ESP32
# elif c_model == 6:
# selected_model = ROM.MODEL_A8
# selected_mcu = ROM.MCU_ESP32
# selected_platform = ROM.PLATFORM_ESP32
except Exception as e:
print("That model does not exist, exiting now.")
exit()
@ -1432,9 +1475,14 @@ def main():
print("")
exit()
print("\nOk, that should be all the information we need. Please confirm the following")
clear()
print("")
print("------------------------------------------------------------------------------")
print(" Installer Ready")
print("")
print("Ok, that should be all the information we need. Please confirm the following")
print("summary before proceeding. In the next step, the device will be flashed and")
print("provisioned, so make that you are satisfied with your choices.\n")
print("provisioned, so make sure that you are satisfied with your choices.\n")
print("Serial port : "+str(selected_port.device))
print("Device type : "+str(products[selected_product])+" "+str(models[selected_model][3]))
@ -1442,6 +1490,9 @@ def main():
print("Device MCU : "+str(mcus[selected_mcu]))
print("Firmware file : "+str(fw_filename))
print("")
print("------------------------------------------------------------------------------")
print("\nIs the above correct? [y/N] ", end="")
try:
c_ok = input().lower()