Updated default config.

This commit is contained in:
Mark Qvist 2021-08-29 13:48:12 +02:00
parent 1fd59f1a02
commit 0c96508cca

View File

@ -566,15 +566,30 @@ loglevel = 4
type = UDPInterface
interface_enabled = True
outgoing = True
device = eth0
port = 4242
listen_ip = 0.0.0.0
listen_port = 4242
forward_ip = 255.255.255.255
forward_port = 4242
# The above configuration will allow communication
# within the local broadcast domains of all local
# IP interfaces. This is enabled by default as an
# easy way to get started, but you might want to
# consider altering it to something more specific.
# Instead of specifying listen_ip, listen_port,
# forward_ip and forward_port, you can also bind
# to a specific network device like below.
# device = eth0
# port = 4242
# Assuming the eth0 device has the address
# 10.55.0.72/24, the above configuration would
# be equivalent to the following manual setup.
# Note that we are both listening and forwarding
# to the network segments broadcast address.
# Note that we are both listening and forwarding to
# the broadcast address of the network segments.
# listen_ip = 10.55.0.255
# listen_port = 4242
# forward_ip = 10.55.0.255