Reticulum is the cryptography-based networking stack for wide-area networks built on readily available hardware. It can operate even with very high latency and extremely low bandwidth. Reticulum allows you to build wide-area networks with off-the-shelf tools, and offers end-to-end encryption and connectivity, initiator anonymity, autoconfiguring cryptographically backed multi-hop transport, efficient addressing, unforgeable delivery acknowledgements and more.
The vision of Reticulum is to allow anyone to be their own network operator, and to make it cheap and easy to cover vast areas with a myriad of independent, interconnectable and autonomous networks. Reticulum **is not***one* network. It is **a tool** for building *thousands of networks*. Networks without kill-switches, surveillance, censorship and control. Networks that can freely interoperate, associate and disassociate with each other, and require no central oversight. Networks for human beings. *Networks for the people*.
Reticulum is a complete networking stack, and does not rely on IP or higher layers, but it is possible to use IP as the underlying carrier for Reticulum. It is therefore trivial to tunnel Reticulum over the Internet or private IP networks.
Having no dependencies on traditional networking stacks frees up overhead that has been used to implement a networking stack built directly on cryptographic principles, allowing resilience and stable functionality, even in open and trustless networks.
Over practically any medium that can support at least a half-duplex channel with 500 bits per second throughput, and an MTU of 500 bytes. Data radios, modems, LoRa radios, serial lines, AX.25 TNCs, amateur radio digital modes, ad-hoc WiFi, free-space optical links and similar systems are all examples of the types of interfaces Reticulum was designed for.
An open-source LoRa-based interface called [RNode](https://unsigned.io/projects/rnode/) has been designed specifically for use with Reticulum. It is possible to build yourself, or it can be purchased as a complete transceiver that just needs a USB connection to the host.
Reticulum can also be encapsulated over existing IP networks, so there's nothing stopping you from using it over wired ethernet or your local WiFi network, where it'll work just as well. In fact, one of the strengths of Reticulum is how easily it allows you to connect different mediums into a self-configuring, resilient and encrypted mesh.
As an example, it's possible to set up a Raspberry Pi connected to both a LoRa radio, a packet radio TNC and a WiFi network. Once the interfaces are configured, Reticulum will take care of the rest, and any device on the WiFi network can communicate with nodes on the LoRa and packet radio sides of the network, and vice versa.
The best way to get started with the Reticulum Network Stack depends on what
you want to do. For full details and examples, have a look at the [Getting Started Fast](https://markqvist.github.io/Reticulum/manual/gettingstartedfast.html) section of the [Reticulum Manual](https://markqvist.github.io/Reticulum/manual/).
To simply install Reticulum and related utilities on your system, the easiest way is via pip:
```bash
pip3 install rns
```
You can then start any program that uses Reticulum, or start Reticulum as a system service with [the rnsd utility](https://markqvist.github.io/Reticulum/manual/using.html#the-rnsd-utility).
When first started, Reticulum will create a default configuration file, providing basic connectivity to other Reticulum peers. The default config file contains examples for using Reticulum with LoRa transceivers (specifically [RNode](https://unsigned.io/projects/rnode/)), packet radio TNCs/modems, TCP and UDP.
You can use the examples in the config file to expand communication over many mediums such as packet radio or LoRa (with [RNode](https://unsigned.io/projects/rnode/)), serial ports, or over fast IP links and the Internet using the UDP and TCP interfaces. For more detailed examples, take a look at the [Supported Interfaces](https://markqvist.github.io/Reticulum/manual/interfaces.html) section of the [Reticulum Manual](https://markqvist.github.io/Reticulum/manual/).
Reticulum includes a range of useful utilities for managing your networks, viewing status and information, and other tasks. You can read more about these programs in the [Included Utility Programs](https://markqvist.github.io/Reticulum/manual/using.html#included-utility-programs) section of the [Reticulum Manual](https://markqvist.github.io/Reticulum/manual/).
Reticulum implements a range of generalised interface types that covers most of the communications hardware that Reticulum can run over. If your hardware is not supported, it's relatively simple to implement an interface class. I will gratefully accept pull requests for custom interfaces if they are generally useful.
Reticulum targets a *very* wide usable performance envelope, but prioritises functionality and performance over low-bandwidth mediums. The goal is to provide a dynamic performance envelope from 250 bits per second, to 1 gigabit per second on normal hardware.
Currently, the usable performance envelope is approximately 500 bits per second to 20 megabits per second, with physical mediums faster than that not being saturated. Performance beyond the current level is intended for future upgrades, but not highly prioritised at this point in time.
Reticulum should currently be considered beta software. All core protocol features are implemented and functioning, but additions will probably occur as real-world use is explored. There will be bugs. The API and wire-format can be considered relatively stable at the moment, but could change if warranted.
The installation of the default `rns` package requires the dependencies listed below. Almost all systems and distributions have readily available packages for the above dependencies, and when the `rns` package is installed with `pip`, the dependencies will automatically be downloaded and installed as well.
On more unusual systems, and in some rare cases, it might not be possible to install or even compile one or more of the above modules. In such situations, you can use the `rnspure` package instead, which require no external dependencies for installation. Please note that the contents of the `rns` and `rnspure` packages are *identical*. The only difference is that the `rnspure` package lists no dependencies required for installation.
No matter how Reticulum is installed and started, it will load external dependencies only if they are *needed* and *available*. If for example you want to use Reticulum on a system that cannot support [pyserial](https://github.com/pyserial/pyserial), it is perfectly possible to do so using the `rnspure` package, but Reticulum will not be able to use serial-based interfaces. All other available modules will still be loaded when needed.
**Please Note!** If you use the `rnspure` package to run Reticulum on systems that do not support [PyCA/cryptography](https://github.com/pyca/cryptography), it is important that you read and understand the [Cryptographic Primitives](#cryptographic-primitives) section of this document.
If you just want to get started experimenting without building any physical networks, you are welcome to join the Unsigned.io RNS Testnet. The testnet is just that, an informal network for testing and experimenting. It will be up most of the time, and anyone can join, but it also means that there's no guarantees for service availability.
The testnet runs the very latest version of Reticulum (often even a short while before it is publicly released). Sometimes experimental versions of Reticulum might be deployed to nodes on the testnet, which means strange behaviour might occur. If none of that scares you, you can join the testnet via eihter TCP or I2P. Just add one of the following interfaces to your Reticulum configuration file:
Are certain features in the development roadmap are important to you or your organisation? Make them a reality quickly by sponsoring their implementation.
Reticulum has been designed to use a simple suite of efficient, strong and modern cryptographic primitives, with widely available implementations that can be used both on general-purpose CPUs and on microcontrollers. The necessary primitives are:
In the default installation configuration, the `X25519`, `Ed25519` and `AES-128-CBC` primitives are provided by [OpenSSL](https://www.openssl.org/) (via the [PyCA/cryptography](https://github.com/pyca/cryptography) package). The hashing functions `SHA-256` and `SHA-512` are provided by the standard Python [hashlib](https://docs.python.org/3/library/hashlib.html). The `HKDF`, `HMAC`, `Fernet` primitives, and the `PKCS7` padding function are always provided by the following internal implementations:
Reticulum also includes a complete implementation of all necessary primitives *written in pure Python*. If OpenSSL & PyCA are *not* available on the system when Reticulum is started, Reticulum will instead use the internal pure-python primitives. A trivial consequence of this is performance, with the OpenSSL backend being *much* faster. The most important consequence however, is the potential loss of security by using primitives that has not seen the same amount of scrutiny, testing and review as those from OpenSSL.
If you want to use the internal pure-python primitives, it is **highly advisable** that you have a good understanding of the risks that this pose, and make an informed decision on whether those risks are acceptable for your.
Reticulum is relatively young software, and should be considered as such. While it has been built with cryptography best-practices very foremost in mind, it _has not_ been externally security audited, and there could very well be privacy or security breaking bugs. If you want to help out, or help sponsor an audit, please do get in touch.
Reticulum can only exist because of the mountain of Open Source work it was built on top of, the contributions of everyone involved, and everyone that has supported the project through the years. To everyone who helped me, thank you so much.
A number of other modules and projects are either part of, or used by Reticulum. Sincere thanks to the authors and contributors of the following projects:
- [Pure-25519](https://github.com/warner/python-pure25519) by [Brian Warner](https://github.com/warner), *MIT License*
- [Pysha2](https://github.com/thomdixon/pysha2) by [Thom Dixon](https://github.com/thomdixon), *MIT License*
- [Python-AES](https://github.com/orgurar/python-aes) by [Or Gur Arie](https://github.com/orgurar), *MIT License*
- [Curve25519.py](https://gist.github.com/nickovs/cc3c22d15f239a2640c185035c06f8a3#file-curve25519-py) by [Nicko van Someren](https://gist.github.com/nickovs), *Public Domain*
